HAMPTON BAY CAMBRIDGE COFFEE TABLE Manual
![]()
SET UP YOUR FURNITURE PROPERLY
- Ensure that all parts are assembled properly and fully tightened as per the instructions.
- When placing in the desired location, ensure that all legs are resting on the same surface.
EXAMINE YOUR FURNITURE
- Examine occasionally to ensure that there are no loose parts. If loose parts are found, they must be re-tightened fully before additional use.
OBSERVE WEIGHT LIMITS
The weight limits for the following products are listed below:
- Chair: 300 lbs
- Swivel Chair: 300 lbs
- Loveseat: 500 lbs
- Ottoman: 150 lbs
- Table: 50 lbs
- Sofa: 700 lbs
- Rocking Chair: 300 lbs
- Chaise Lounge: 300 lbs
- Dining Table: 100 lbs
- Dining Chair: 200 lbs
![]()
If you overload your furniture, injuries can occur.
Pre-Assembly
PLANNING ASSEMBLY
To prevent damage, place all parts on a soft surface during assembly. Remove all protective caps before beginning assembly.
HARDWARE INCLUDED
![HAMPTON BAY - CAMBRIDGE COFFEE TABLE - HARDWARE INCLUDED HARDWARE INCLUDED]()
Part | Description | | Quantity |
AA | Bolt | φ1/4x16mm | 8 |
BB | Washer | φ6mm | 4 |
CC | Cap for bolt | φ6mm | 4 |
DD | Hex wrench | 4mm | 1 |
PACKAGE CONTENTS
![]()
Part | Description | Quantity |
A | Table-top | 1 |
E | Leg | 4 |
F | Lower shelf | 1 |
Assembly
- Attaching the legs to the top
- Place the top (A) on a soft surface.
- Attach the legs (E) to the top (A) by aligning holes on the legs (E) with the holes on the top (A). The legs must be attached as this image shown. Insert bolts (AA) and hand tighten. Do not tighten completely.
![HAMPTON BAY - CAMBRIDGE COFFEE TABLE - Attaching the legs to the top Attaching the legs to the top]()
- Attaching the shelf to the legs
- Attach the shelf (F) to the legs (E) by aligning holes on the shelf (F) with the holes on the legs (E). The shelf must be attached as this image shown. Insert bolts (AA) with washers (BB) and hand tighten. Do not tighten completely.
![HAMPTON BAY - CAMBRIDGE COFFEE TABLE - Attaching the shelf to the legs Attaching the shelf to the legs]()
- Adding the caps
- Check and make adjustments as needed.
- Fully tighten all the bolts with the Hex wrench (DD) and cover the bolts (AA) with caps (CC).
- Adjust leg levelers as required.
![]()
- Completing the assembly
- Place the table right side up.
- This table is now ready for your enjoyment.
![HAMPTON BAY - CAMBRIDGE COFFEE TABLE - Completing the assembly Completing the assembly]()
Care and Cleaning
- Before using, wipe with a clean, dry cloth. Do not use bleach or solvents. When not in use, store furniture in a cool, dry place.
- If your set includes cushions or mesh fabric, they may be cleaned by hand with a mild solution of soap and water.
Rinse cushion thoroughly and allow to drip dry. Do not machine wash or tumble dry, as cushions may shrink. - Do not use bleach or solvents on fabrics. When cleaning the table top make sure to use a soft, clean cloth that does not bleed color as well.
Questions, problems, missing parts? Before returning to the store, call Home Depot Customer Service
8 a.m. - 6 p.m., EST, Monday-Friday
1-855-HD-HAMPTON
HAMPTONBAY.COM
Retain this manual for future use.
Documents / Resources
References
Download manual
Here you can download full pdf version of manual, it may contain additional safety instructions, warranty information, FCC rules, etc.
Download HAMPTON BAY CAMBRIDGE COFFEE TABLE Manual
Need help?
Do you have a question about the CAMBRIDGE COFFEE TABLE and is the answer not in the manual?
Questions and answers