Graco 3A00RIT - Contempo Highchair - Rittenhouse Owner's Manual page 9

EN
Instructions
Attaching Casters (Certain models only)
Attach front casters with locks onto front legs.
1
Snap rear feet onto rear legs.
2
Opening Highchair
See images –
3 6
Reclining Seat
3 recline positions
7
Adjusting Height
See images –
8 9
To Secure Your Child
See images –
10 20
Use slide adjuster at shoulder and waist for
15
further adjustment. Repeat on other side.
When changing harness strap slots, MAKE
16
SURE harness straps are going through same
slots in seat pad and seat back.
The harness straps must go into the slot
that is even with or slightly above the shoul-
ders. Avoid twisting straps.
Attaching Tray
Slide tray onto snack tray.
21
Squeeze adjustment button on front of tray
22
to adjust tray to fit child.
Tray Insert
Snap tray insert onto tray.
23
To remove, lift tray up from corner.
24
Head Support
See images
25
–
26
Storage
Remove tray before folding highchair.
27
Push red buttons on each side of snack tray to
28
release, as you push side bars back.
Place tray on highchair for storage, as shown.
31
32 Optional: for maximum storage, lower high-
chair.
Removing Seat Pad
Unhook elastic straps on seat pad from the
33
back of footrest.
Unfasten hook and loop tape on back of
34
seat pad.
Pull bottom of seat pad out through open-
35
ing behind snack tray.
Push red buttons on each side of snack tray
36
to release, as you push side bars back.
37
Push crotch strap through
38
bottom slot.
Pull sides of seat pad fabric out of the chan-
39
nels located in the back of the snack tray.
Push waist straps through slots in seat pad.
40
Pull harness straps through slots in seat
41
pad.
42 Pull seat pad off backrest.
Casters (Certain models only)
To lock casters.
43
To unlock casters.
44
Mix 'N Move Toys (Certain models only)
To remove plugs.
45
– To attach toy
46 47
To reattach plugs when not using
48
Mix "N Move Toys.
9