Sunnydaze Decor DSL-698 Instructions

78-inch wooden garden arbor walkway wedding arch

Download this manual

PARTS:

Step 1: Attach the two headers (Part B) to the top of the two side

lattices (Part A). Use the four included bolt sets (Hardware 1)

to attach the two headers to the side lattices as shown in the

diagram to the right.

Step 2: Attach the seven slats (Part C) to the top of the headers (Part

B). Use 14 of the included screws (Hardware 2) to fasten the

slats to the top of the headers.

DSL-698 Instructions

Need help?

Do you have a question about the DSL-698 and is the answer not in the manual?

Page 1 DSL-698 Instructions PARTS: Step 1: Attach the two headers (Part B) to the top of the two side lattices (Part A). Use the four included bolt sets (Hardware 1) to attach the two headers to the side lattices as shown in the diagram to the right.
Page 2 Step 3: Attach the four support brackets (Part D) to the headers (Part B) and the side lattices (Part A) as shown. Use the remaining eight screws (Hardware 2) to fasten the support brackets to the headers and side lattices. Step 4: Stand the garden arch up and move it to your preferred location.