Sunnydaze Decor DSL-674 Manual

PARTS:
ASSEMBLY:
1. Attach pole to the front bottom part of the body, align the holes, then secure them with one 06x55mm screw,
and one 6mm nut. Attach pole with leg to the back-bottom part of the body, then secure them by using two
6x55mm screws, and two 6mm nuts.
2. Position the wheel into the hole on the front pole, attach another pole, and align the hole and another pole,
then secure them by using one 6x55mm screw and one 6mm nut.
3. Attach another pole with leg to the back of the body, and secure them by using two 6x55mm screws, and two
6mm nuts.
4. Attach the handle on to the frame, then align the hole and pole up, secure them using four 6x45mm screws and
four 6mm nuts.
DSL-674