Advertisement
Quick Links
06-157 CRUISE STEERING WHEEL
INSTALLATION INSTRUCTIONS
ITEMS INCLUDED
• STEERING WHEEL
• STEERING WHEEL COVER
• STEERING WHEEL ADAPTER BUSHINGS (SET OF 3)
• FENDER WASHER
• STEERING COLUMN COVER CLAMSHELL
• 2 PHILLIPS HEAD SCREWS
STEP 1:
Make sure wheels are pointed straight.
STEP 2:
Remove OEM steering wheel cover.
TOOLS NEEDED
• 15/16" (or 24mm) Socket
• Phillips Head Screwdriver
• Torque Wrench
• Rubber Mallet/Deadblow
Advertisement
Related Manuals for MadJax 06-157
Summary of Contents for MadJax 06-157
- Page 1 06-157 CRUISE STEERING WHEEL INSTALLATION INSTRUCTIONS ITEMS INCLUDED TOOLS NEEDED • STEERING WHEEL • 15/16” (or 24mm) Socket • STEERING WHEEL COVER • Phillips Head Screwdriver • STEERING WHEEL ADAPTER BUSHINGS (SET OF 3) • Torque Wrench • FENDER WASHER •...
- Page 2 STEP 3: Using socket, remove the steering wheel nut from steering column. STEP 4: Remove existing steering wheel from steering column. This may require some wiggling or encouragement using the deadblow mallet. NOTE: Take care not to damage hard plastic parts.
- Page 3 STEP 5: Select the correct steering wheel adapter bushing for your cart. CLUB CAR E-Z-GO YAMAHA ® ® ® STEP 6: Put adapter bushing on steering column splines with the widest end of the taper downwards. To keep the steering wheel best aligned with the wheels, the adapter ears should be in a ‘y’...
- Page 4 STEP 7: Slide the MadJax steering wheel onto the adapter, followed by the provided fender washer and factory lock nut. ® STEP 8: Using the socket, tighten the locknut until just snug. NOTE: **Do not overtighten**...
- Page 5 STEP 9: Before replacing the steering wheel cover, test drive in a safe area to check steering wheel alignment. If the steering wheel isn’t quite aligned, loosen the lock nut and gently slide the steering wheel and bushing off of the steering column and re-seat to adjust.
- Page 6 STEP 12: Slide the steering column cover clamshell over the base of the steering wheel. Ensure that the holes are towards the passenger side of the cart. Secure with provided Phillips head screws. I N S TA L L AT I O N C O M P L E T E...
Need help?
Do you have a question about the 06-157 and is the answer not in the manual?
Questions and answers