Advertisement
Quick Links
Refrigerator
SINGLE DOOR SERIES
USER MANUAL
MERM33S1ABB
MERM33S1AST
Warning notices: Before using this product, please read this manual carefully and keep it for future reference.
The design and specifications are subject to change without prior notice for product improvement.
Consult with your dealer or manufacturer for details.
The diagram above is just for reference. Please take the appearance of the actual product as the standard.
Advertisement
Related Manuals for Midea MERM33S1ABB
Summary of Contents for Midea MERM33S1ABB
- Page 1 Refrigerator SINGLE DOOR SERIES USER MANUAL MERM33S1ABB MERM33S1AST Warning notices: Before using this product, please read this manual carefully and keep it for future reference. The design and specifications are subject to change without prior notice for product improvement. Consult with your dealer or manufacturer for details.
- Page 3 THANK YOU LETTER Thank you for choosing Midea! Before using your new Midea product, please read this manual thoroughly to ensure that you know how to operate the features and functions that your new appliance offers in a safe way.
- Page 4 SPECIFICATIONS Product model MERM33S1ABB / MERM33S1AST Volume 3.3 cu.ft.(93 L) Rated Voltage 115 V~ Rated Frequency 60 Hz Rated Current 1.0 A Refrigerant R600a Amount 0.71 oz (20 g) Product Dimension ( W x D x H) 18.6x17.6x34.0 in(472 x 446 x 864 mm)
- Page 5 PRODUCT OVERVIEW Names of components Temperature control knob Shelf Leveling feet Toolbar Zip-top can frame ATTENTION The picture above is only for reference. The actual configuration will depend on the physical product or statement by the distributor.
- Page 6 PRODUCT INSTALLATION Install Instruction Finding a suitable location • This refrigerator is designed to be free standing only, and should not be recessed or built-in. • The refrigerator should be placed in a well-ventilated indoor place; the ground shall be flat and sturdy . •...
- Page 7 Space requirement diagram (when the door is open and when the door is closed) 135 ° Width Depth Overall Width Depth doors open doors open Height Notice: All dimensions in mm. ATTENTION The picture above is only for reference. The actual configuration will depend on the physical product or statement by the distributor.
- Page 8 Door right-left change List of tools to be provided by the user Cross screwdriver Putty knife Thin-blade screwdriver 5/16″ socket spanner Masking tape Parts to be used for door reverse Parts Quantity Notes Upper hinge Pre-installed on the refrigerator, still used Hinge cover when door is reversed Tapping locking screw...
- Page 9 3. Remove the door first, then remove the lower hinge assembly and leveling foot, interchange the positions of the lower hinge assembly and leveling foot and install them. 4. Install the door on the lower hinge assembly, and then install the upper hinge, hinge cover, shaft sleave , pins and hole cap in sequence.
- Page 10 Leveling feet To avoid vibration, the unit must be leveled. If required, adjust the leveling screws to compensate for the uneven floor. The front should be slightly higher than the rear to aid in door closing. Leveling screws can be turned easily by tipping the cabinet slightly. Turn the leveling screws counterclockwise to raise the unit, clockwise lower it.
- Page 11 OPERATION INSTRUCTIONS Control panel TYPE A • Turn the knob counterclockwise, the temperature inside the box becomes higher; turn the knob clockwise, the temperature inside the box becomes lower. • Please adjust between “COOL” and “COOLER” gear. • Recommended gear: “NORMAL”. •...
- Page 12 Tips on storing food Cooling compartment • To reduce moisture and subsequent ice build-up, never put liquid into the refrigerator in unsealed containers. Frost tends to concentrate in the coolest parts of the evaporator. Storing uncovered liquids results in a more frequent need for defrosting.
- Page 13 CLEANING AND MAINTENANCE Defrost • Power off the refrigerator. • Remove the food from the refrigerator and place it properly to prevent food from melting. • Clear the drain pipe (to use soft materials to prevent damage to the liner), Prepare the water containers for defrosting.
- Page 14 TROUBLESHOOTING The following simple issues can be handled by the user. Please call the after-sale service department if the issues are not solved. Problem Possible reason • Check whether the appliance is connected to power or whether the plug is in well contact Failed operation •...
- Page 15 Problem Possible reason • Remove foreign matters on the door seal Door seal fails to be tight • Heat the door seal and then cool it for restoration (or blow it with an electrical drier or use a hot towel for heating) •...
Need help?
Do you have a question about the MERM33S1ABB and is the answer not in the manual?
Questions and answers