Related Manuals for MX C4
Summarization of Contents
1. Safety rules
1.1 Safety warning pictogram
Explains the meaning of safety pictograms used in the manual, including DANGER, WARNING, and CAUTION.
1.2 PPE Table (Personal Protective Equipment)
Details required Personal Protective Equipment (PPE) for safe operation and examples of associated risks.
1.3 Loader operating limits on tractors without cab or 4-post rollbar
Outlines operational limits and safety considerations for tractors lacking a protective structure.
1.4 Non-compliance with the safety and usage rules
Discusses consequences of not adhering to safety and usage guidelines, including warranty voidance.
3. Safety stickers
3.1 MX C1, C1s loaders
Details the location and importance of safety stickers on MX C1 and C1s loader models.
3.2 MX C2, C3, C4 loaders
Describes the safety stickers applicable to MX C2, C3, and C4 loader models and their meanings.
6. Control
6.1 Control using the tractor's control valves
Refers to the tractor's manual for controlling the loader via its own hydraulic valves.
6.2 Control with the MX control valve
Details the operation, adjustments, and safety features of the MX loader's integrated control valve or joystick.
9. Unhitching implements - MX C2, C2+, C3, C3+, C4, C4+ Loaders
9.1 Implement carrier with manual unlocking
Explains the procedure for unhitching implements using a manual unlocking mechanism on specific loader models.
11. Implement unhitching / hitching - MX C1, C1s, C2u, C3u Loaders
11.1 Implement unhitching
Provides instructions for detaching implements from MX C1, C1s, C2u, and C3u loader models.
11.2 Implement hitching
Outlines the procedure for attaching implements to MX C1, C1s, C2u, and C3u loader models.
12. Commissioning the loader - checklist
12.2.1 Static test procedure
Describes the static checks to verify the loader's structural integrity and compliance before initial operation.
12.2.2 Dynamic test procedure
Details the dynamic tests to confirm the loader's operational performance and safety under actual working conditions.
17. Safety when lifting and dumping
17.1 Extract from the Front Loaders standard EN12525 + A2 2010:
Provides an excerpt from the EN12525+A2:2010 standard regarding protection against unintentional lowering.
19. Recycling MX products
Hydraulic system
Outlines procedures for draining hydraulic oil and recycling hydraulic hoses at the end of product life.
Disposal of hazardous waste (oils and hoses)
Details the correct methods for storing and disposing of hydraulic oils and hoses as hazardous waste.
20. SAFETY LIFT RAM STOP ON LOADER
20.1 Dedicated stickers
Highlights the importance of affixing safety stickers to the loader to warn about serious risks like exceeding load limits.
Need help?
Do you have a question about the C4 and is the answer not in the manual?
Questions and answers