Wireless Network - Samsung BD P3600 - Blu-Ray Disc Player User Manual

connections

Wireless Network

You can connect to network with a Wireless IP sharer.
1. A wireless AP/IP router is required to make a wireless network connection. Connect the wireless
LAN adapter to the USB port on the rear panel of the Blu-ray Disc Player, and set the wireless
network options. (See pages 53~55)
2. If your PC supports wireless LAN connection, it can be connected to the router by cable or
wirelessly. (For more information on router connection, refer to the user manual of the router or
contact the router manufacturer for technical assistance.)
Modem Port
M
`
This unit is compatible with Samsung's Wireless LAN Adapter only.
(Model name: WIS09ABGN).
`
You must use a wireless IP sharer that supports IEEE 802.11 a/b/g/n. (n is recommended for stable
operation of the wireless network.)
`
Wireless LAN, in its nature, may cause interference, depending on the use condition (AP performance,
distance, obstacle, interference by other radio devices, etc).
`
Set the wireless IP sharer to Infrastructure mode. Ad-hoc mode is not supported.
`
When applying the security key for the AP (wireless IP sharer), only the following is supported.
1)
Authentication Mode : WEP, WPAPSK, WPA2PSK
2)
Encryption Type : WEP, TKIP, AES
_ connections
Wireless IP sharer
Modem Cable
Wireless LAN
Adapter