connections
cONNecTING TO a TV WITH DVI caBLe
- BeST QuaLITy (recOMMeNeD)
1.
Using an HDMI-DVI cable (not included), connect the HDMI OuT terminal on the rear of the Blu-ray Disc Player
to the DVI IN terminal of your TV.
2.
Using the audio cables, connect the auDIO (red and white) OuT terminals on the rear of the Blu-ray Disc
Player to the auDIO (red and white) IN terminals of your TV.
Turn on the Blu-ray Disc Player and TV.
3.
Press the input selector on your TV remote control until the DVI signal from the Blu-ray Disc Player appears on
your TV screen.
If you have set the remote control to operate your TV (see pages 20~21), press the TV SOurce button on
~
the remote control and select HDMI as the external source of the TV.
Connecting the HDMI cable while the Blu-ray Disc Player's power is on will result in the player's video output being
changed to HDMI mode automatically (see page 45).
M
`
Depending on your TV, certain HDMI output resolutions may not work.
Please refer to the user's manual of your TV.
`
If an HDMI-DVI cable is plugged into the TV, the Blu-ray Disc Player's output resolution is set to HDMI
automatically within 10 seconds.
`
If Component and HDMI are both connected, HDMI mode is automatically selected. (See page 45)
`
When you connect the player to the TV using the HDMI cable for the first time or to a new TV, the HDMI
output resolution will automatically be set to the highest provided by the TV
`
If the HDMI cable is connected or removed during playback of a CD-DA, the player will stop playing.
_ connections
Audio cable
HDMI-DVI cable
(not included)
Red
White