Table of Contents
Advertisement
Quick Links
Advertisement
Table of Contents
Related Manuals for Union Audio orbit.4LE
Summarization of Contents
Limited One-Year Manufacturer's Warranty
Conditions of Warranty
Outlines the specific conditions under which the product's warranty is valid, covering misuse, alterations, and return procedures.
About Orbit LE
Additional Highlights
Details key features such as Cue Mix, 3-Band Isolator, HPF, Master Insert Jacks, and Balanced Outputs.
Rear Panel Connections
Channel Input
Details the RCA inputs for turntables (RIAA) and line-level sources, warning against connecting line-level sources to RIAA inputs.
Earth terminal
Explains the purpose and connection of the ground terminal for turntables to reduce hum.
Aux out
Describes the auxiliary output 1/4" TRS jacks and their pinout conventions.
Aux Return / Insert
Explains the function of auxiliary return and the mix insert points, detailing connection conventions.
Record Out
Details the RCA output for connecting to recording devices, its level, and compatibility.
Rear Panel Connections Continued
Mic Input
Explains the microphone input on channels one and two for the Orbit.4 LE, bypassing RIAA input when engaged.
Master Out
Describes the electronically balanced XLR master outputs, pinout, and typical output levels.
Booth Out
Details the impedance balanced 1/4" TRS booth outputs, pinout, and typical output levels.
Power
Instructions for connecting and operating the mixer's power supply, emphasizing using the correct adapter.
Specification
Distortion plus Noise (THD+N) un-weighted
Specifies the unweighted distortion and noise levels for various signal paths and frequencies.
Frequency Response
Details the frequency response range for line inputs to the mix output.
RIAA Accuracy
Specifies the accuracy of the RIAA equalization curve for phono inputs.
Shutoff and Crosstalk
Provides specifications for fader shutoff and line crosstalk between channels.
Noise 22Hz to 22kHz Un-Weighted
Details un-weighted noise levels for residual mix output and line inputs.
EQ and Filter Frequency
Lists the frequency points for the channel high-pass filter and master 3-band isolator.
Headphone Amplifier
Specifies the maximum output level and impedance for the headphone amplifier.
Power Supply
Details the type, voltage range, output, and efficiency of the external power supply.
Dimensions
Dimensions LE 2
Provides physical dimensions (height, width, depth, weight) and packed dimensions for the Orbit LE 2.
Dimensions LE4
Provides physical dimensions (height, width, depth, weight) and packed dimensions for the Orbit LE 4.
Need help?
Do you have a question about the orbit.4LE and is the answer not in the manual?
Questions and answers