System Information; Speaker Setting - Denon DBP-2012UDCI Owner's Manual

ENGLISH

Speaker Setting

The settings for audio signals output from the analog 7.1ch output terminals are made.
• This setting is effective for analog audio output only.
• Initial setting for the speaker is 7.1ch. For multi-channel playback, be sure to make this setting.
Setting items
Configuration 2.1ch : Front L and R speakers are used.
Set the number of speakers 3.1ch : Front L and R and a center speakers are used.
to be used. 4.1ch : Front L and R and surround L and R speakers are used.
5.1ch : For normal 5.1-channel surround system.
6.1ch : A surround back speaker is added to the 5.1-chananel surround.
system (The surround back speaker is output from SBL ch.).
7.1ch : For normal 7.1-channel surround system.
The settings below can be made for all settings from "2.1ch" to "7.1ch".
• Speaker size: Large or Small
• Subwoofer: Used or not used
None : Subwoofer is not connected.
LFE : Adds the low frequency signal of the channel for which the
speaker size is set to "small" to the subwoofer signal and outputs it.
LFE+Main : Adds the low frequency signal of all channels to the
subwoofer signal and outputs it.
• Sound level：0 dB to 10 dB (initial setting: 0 dB)
• Distance：0 m to 10 m (initial setting: 3 m)
n When 2.1ch is selected
Lt/Rt : For selecting down-mixing of multi-channel audio input of DTS-
HD, DTS-Digital Surround, Dolby Digital Plus or Dolby Digital audio to
a format supporting Dolby surround. If the unit is connected to an AV
amplifier supporting Dolby surround, surround sound can be enjoyed.
Stereo : Multi-channel sound is down-mixed to 2-channel stereo.
NOTE
"Lt/Rt" and "Stereo" are effective only when "2.1ch" is selected.
Check the speaker settings, using a test tone.
Test Tone
Automatically switches the test tone output speaker.
ENTER
Press
NOTE
• Before starting the test tone, reduce the volume setting of the amplifier
to an appropriate level.
• The test tone is output soon after
• Pressing
42
Remote control operation
buttons
Default settings are underlined.
Setting details
to manually set the values for the desired speaker.
ENTER
is pressed.
RETURN
stops the test tone.
Displaying the menu
Cancel the menu
Audio Setting

System Information

MAC address is displayed.
Setting items
MAC Address
Displays the MAC address.
Move the cursor
(Up/Down/Left/Right)
Setting details
Displays the MAC address.
Decision the setting Return to previous menu