1. Manuals
  2. Brands
  3. AG Manuals
  4. Farm Equipment
  5. 175
  6. Product manual

AG 175 Product Manual

Dispenser
Hide thumbs

Advertisement

Table of Contents

Garnett Farms Engineering Ltd, Clay Bank Farm, Allostock, Nr Knutsford, Cheshire, WA16 9NE
Tel: 00 44 1565 722922 Fax: 00 44 1565 723303
To effect the correct application of the safety requirements stated in the EEC Directives and the British
Standards, the following standards and/ or technical specification have been used.
•
BS 3733:1974 - Specification for V-belt drives for agricultural purposes
•
BS EN ISO 4254-1:2005 - Agricultural machinery - Safety and General Requirements.
•
BS ISO14269-1:1997 -Tractors and self-propelled machines for agriculture Operator
enclosure environment.
•
BS EN 292-1:1991 - Safety of machinery and the Basic concepts and general principles
for design - Basic terminology, methodology.
•
BS EN 292-2:1991 - Safety of machinery - Basic concepts, general principles for design-
Technical principles and specifications.
•
BS EN 294:1992 - Safety of machinery - Safety distances to prevent danger zones being
reached by the upper limbs.
•
BS 5401:1990 - Guide to information content and presentation of operators' manuals
provided for tractors and machinery for agriculture and forestry.
Email: info@agdispenser.co.uk
Product Manual and
Specifications
AG 150/175/200
2 -8/12/08
Part no – MC9-17
1

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the 175 and is the answer not in the manual?

Questions and answers

Related Manuals for AG 175

Summary of Contents for AG 175

  • Page 1 Tel: 00 44 1565 722922 Fax: 00 44 1565 723303 Email: info@agdispenser.co.uk Product Manual and Specifications AG 150/175/200 To effect the correct application of the safety requirements stated in the EEC Directives and the British Standards, the following standards and/ or technical specification have been used. •...
  • Page 2 This check list should be used in conjunction with the operators IMPORTANT: - manual. Before starting, removing any parts packed, read the operators manual PRE – DELIVERY LIST, TO BE COMPLETED BY THE MANUFACTURER AND DEALER MANUFACTURER P-D-I Signs and safety stickers fitted Overall machine in good condition (i.e.

  • Page 3: Specification

    Specification Model AG Capacity(c/m) Weight (kg) Width (m) Depth (m) Height (m) 1515 1010 1800 1025 1090 2034 1339 1247 Tilt kit Safety rules and Pictogram / label identification Safety rules and Pictogram / label identification Safety rules and Pictogram / label identification...
  • Page 4 4. Only the operator must operate the AG Dispenser and must remain in the cab during the Only the operator must operate the AG Dispenser and must remain in the cab during the Only the operator must operate the AG Dispenser and must remain in the cab during the complete working cycle.

  • Page 5: Identification Of The Machine

    3. If the AG Dispenser is mounted on a 3 point linkage then also ensure that If the AG Dispenser is mounted on a 3 point linkage then also ensure that...
  • Page 6 Fig. 1a Typical Bolted Mounting Brackets Fig. 1a Typical Bolted Mounting Brackets IMPORTANT: If the AG Dispenser is to be used with Bolt on Brackets, these must be : If the AG Dispenser is to be used with Bolt on Brackets, these must be : If the AG Dispenser is to be used with Bolt on Brackets, these must be supplied from your local AG dealer.
  • Page 7 3 point frame and secure, using the pin and lynch pin. 4. Adjust the tractor link arms stabilisers so that the AG Dispenser is held central and there is no Adjust the tractor link arms stabilisers so that the AG Dispenser is held central and there is no Adjust the tractor link arms stabilisers so that the AG Dispenser is held central and there is no undue lateral movement.
  • Page 8 2. The blade of the AG must be the only point that is in contac The blade of the AG must be the only point that is in contact with the ground. 3. Reverse into the pile of material, and collect material of the face of the pile only.
  • Page 9 15-60 l/min 15-60 l/min If the machines are to be used on prime movers with limited oil flow, the AG dispensers If the machines are to be used on prime movers with limited oil flow, the AG dispensers If the machines are to be used on prime movers with limited oil flow, the AG dispensers can be modified to suit, using can be modified to suit, using a selection of pulley ratios.
  • Page 10 ADJUSTMENTS Slider regulator All the AG Dispensers are supplied with adjustable slides All the AG Dispensers are supplied with adjustable slides that are designed to regulate are designed to regulate the flow of material through the machine. the flow of material through the machine.

  • Page 11: Maintenance

    Maintenance V-belt Tension The AG Dispenser is designed for the optimum performance with minimum requirement The AG Dispenser is designed for the optimum performance with minimum requirement The AG Dispenser is designed for the optimum performance with minimum requirement for maintenance.
  • Page 12 11. Re-fit bolts removed at stage 1 (Fig 5) fit bolts removed at stage 1 (Fig 5) 12. AG 150 series, re AG 150 series, re-fit guard removed at stage 3 (Fig 6) Fig 8. 13. Run and test all machines.
  • Page 13 DISCHARGE BELT SERVICE DISCHARGE BELT SERVICE The AG Dispensers are fitted with the unique high quality endless polyurethane belt, The AG Dispensers are fitted with the unique high quality endless polyurethane belt, The AG Dispensers are fitted with the unique high quality endless polyurethane belt, giving long and lasting durability.

  • Page 14: Conveyor Belt Removal

    CONVEYOR BELT REMOVAL CONVEYOR BELT REMOVAL 150/175/200 150/175/200 Remove the adjuster threaded bar from the Hanger adjuster threaded bar from the Hanger bearing. This is easily achieved by locking the two bearing. This is easily achieved by locking the two...
  • Page 15 CHECKS - 6. Check idler rollers (A) Fig 15 for 6. Check idler rollers (A) Fig 15 for wear. These are non serviceable items, and must be replaced if items, and must be replaced if any wear has incurred. 7. Item (B) Fig 15. Check for wear. 7.
  • Page 16 FITTING DISCHARGE BELT FITTING DISCHARGE BELT Fig 18 Fig 18 1. As shown in Fig 18, slide the belt onto As shown in Fig 18, slide the belt onto the conveyor frame. Advisable to wear the conveyor frame. Advisable to wear gloves.
  • Page 17 Fig 21 1. Fig 22 shows the required clearance from Fig 22 shows the required clearance from the edge of the cleat (on the main belt) to the edge of the cleat (on the main belt) to the edge of the side skirt, A = 10 the edge of the side skirt, A = 10-15mm 2.
  • Page 24 ITEM NO. QUANTITY PART NO. DESCRIPTION Tapered bush AG 150 MC6-1 Brace AG 150 MC7-1 Head roller AG 150 MC7-2 AG 150 MC7-3 Idler roller AG 150 MC7-4 Conveyor side front AG 150 MC7-5 Conveyor side rear AG 150 MC7-6...
  • Page 25 Machine ITEM NO. QUANTITY PART NO. DESCRIPTION AG 175 MC8-1 Side skirt AG 175 MC8-2 Side skirt (large) metal clamp AG 175 MC6-8 Flange bearing (Conveyor) AG 175 MC6-29 M10 *30 Cup Square bolt AG 175 MC6-9 M10 plain nut...
  • Page 26 Machine ITEM NO. QUANTITY PART NO. DESCRIPTION MC6-1 MC6-4 Tensioner plate assembly MC6-27 MC6-2 MC6-15 M10*70 H.T Setscrew (8.8) MC6-2 MC9-4 " MC9-6 Side skirt (large) metal clamp & MC6-15 & % ' ( ) * ' + Side skirt (small) metal clamp MC6-10 # % ' ) * ' +...

  • Page 27: Warranty Registration Form

    Date of Purchase: Purchaser' s Name: Address: Dealer' s Name: Address: Machine Type: AG Dispenser Model: 150/175/200 Serial No: GARNETT FARMS ENGINEERING POLICY NOTE G.F.E. IS ONE OF CONTINUOUS IMPROVEMENT. WE RESERVE THE RIGHT TO CHANGE PRICES OR SPECIFICATIONS OF EQUIPMENT AT ANY TIME WITHOUT NOTICE. ORDERS ARE ACCEPTED SUBJECT TO OUR STANDARD TERMS AND CONDITIONS.

Table of Contents