Advertisement
Quick Links
Hardware Installation Guide for the Cisco 1000 Series Integrated
Services Router
First Published: 2019-06-07
Last Modified: 2024-02-26
Americas Headquarters
Cisco Systems, Inc.
170 West Tasman Drive
San Jose, CA 95134-1706
USA
http://www.cisco.com
Tel: 408 526-4000
800 553-NETS (6387)
Fax: 408 527-0883
Advertisement
Related Manuals for Cisco C1131-8PLTEPW Series
Summarization of Contents
CHAPTER 1 Overview of Cisco 1000 Series Integrated Services Routers
About Cisco 1000 Series Integrated Service Routers
Introduces the Cisco 1000 Series Integrated Services Routers, their capabilities, and target market.
Chassis Views
Provides front and back panel views of routers, detailing interfaces and indicators.
LED Indicators
Explains the meaning and behavior of various LED indicators on the router.
Reset Button
Details the function and usage of the reset button for router operation.
Power Supply
Outlines the power specifications and requirements for the Cisco 1000 Series routers.
Slots and Interfaces
Describes the slot, subslot, and port numbering convention for router interfaces.
Specifications of Cisco 1000 Series Integrated Services Routers
Directs users to a separate document for detailed specifications of the routers.
Periodic Inspection and Cleaning
Provides recommendations for regular inspection and cleaning of the router's external surfaces.
CHAPTER 2 Prepare for Router Installation
Safety Recommendations
Provides essential safety instructions and warnings before installing the router.
Safety With Electricity
Details critical safety precautions related to handling electrical components and the router.
Prevent Electrostatic Discharge Damage
Explains procedures to prevent damage from electrostatic discharge (ESD) during installation.
General Site Requirements
Lists requirements for the installation site to ensure safe and proper router operation.
Site Selection Guidelines
Provides guidance on selecting an appropriate environment for router installation.
Rack Requirements
Specifies the rack mounting requirements, including the use of 19-inch racks.
Power Guidelines and Requirements
Lists requirements for power supply and guidelines for installation.
Network Cabling Specifications
Describes cables and specifications required for router installation.
Required Tools and Equipment for Installation and Maintenance
Lists the necessary tools and equipment for installing and upgrading the router.
CHAPTER 3 Install and Connect the Router
Unpack the Router
Instructions on how to unpack the router and check its contents.
Set up Router on Desktop, Rack, or Wall
Guides on placing the router on a desktop, in a rack, or mounting it on a wall.
Rack Mount
Details the procedure for mounting the router in a rack using brackets.
Mount the Router under a Desk or a Shelf
Instructions on how to mount the router under a desk or on a shelf using an optional kit.
Mount Router using DIN Rail Brackets
Explains how to mount the router using DIN rail brackets.
Wall Mount the Router
Provides instructions for mounting the router on a wall.
Chassis Grounding
Details the procedure for grounding the router chassis for safety and proper operation.
Connect Power Cable
Guides on how to connect the power cable to the router.
Connect the Router to a Console
Instructions for connecting the router to a console for initial setup and management.
Connect to the Serial Port with Microsoft Windows
Steps for establishing a console connection using a PC running Windows.
Connect to the Console Port with Mac OS X
Steps for establishing a console connection using a Mac OS X system.
Connect to the Console Port with Linux
Steps for establishing a console connection using a Linux system.
Install the Silicon Labs USB Device Driver
Instructions for installing necessary USB drivers for console connectivity.
Connect WAN and LAN Interfaces
Explains how to connect the router to WAN and LAN networks.
Ports and Cabling
Summarizes typical WAN and LAN connections and cabling specifications.
Connection Procedures and Precautions
Provides procedures and precautions for connecting WAN and LAN interfaces.
Configure the Router at Startup
Guides on initial router configuration after installation.
CHAPTER 4 Install and Upgrade Internal Modules and Field Replaceable Units
Replace the Chassis Covers for C111X and C1111x
Instructions on removing and replacing the chassis covers for specific models.
External Modules
Discusses the installation of external modules and field-replaceable units (FRUs).
Install and Remove Small Form Pluggable Modules
Details the process of installing and removing SFP modules for connectivity.
Install a Pluggable Interface Module
Guides on installing pluggable interface modules into the router.
Installing a SIM Card on C111X, C1109-2PX, C1109-4P
Instructions for installing SIM cards into specific router models.
Installing a Nano-SIM Card into a Nano-To-Micro-SIM Adapter
Steps for using an adapter to install a nano-SIM card.
CHAPTER 5 ROM Monitor Overview
ROM Monitor Overview
Explains the ROM Monitor software, its function, and how to access its CLI.
Need help?
Do you have a question about the C1131-8PLTEPW Series and is the answer not in the manual?
Questions and answers