Related Manuals for JUNKKARI HJ-10GT
Summarization of Contents
TECHNICAL SPECIFICATIONS
Machine Type Specifications
Lists specifications for HJ 10 M, HJ 10 GT, HJ 10 GT models.
Specific Chipper Details
Fields to record the model, serial number, and year of manufacture.
SAFETY PRECAUTIONS
General Safety Notes
Covers clothing, operation, decals, equipment, and general user conduct.
Run Down Time
Specifies the duration for rotating parts to stop after power disengagement.
Transport and Site-Changing Safety
Details regulations and safety for road transport and site movement.
Universal Drive Shaft Safety
Instructions for safe connection, use, and maintenance of the PTO drive shaft.
Hydraulic System Safety
Warnings regarding high-pressure oil and safe hydraulic hose connections.
Oil and Grease Handling Protection
Guidance on safe handling of oils and greases, and waste disposal.
Safety Decals and Components
Key Safety Decals and Warnings
Explains various warning labels and safety symbols on the machine.
Serial Number Plate Information
Location and importance of the machine's serial number plate.
Lifting Bracket and Controls
Identifies lifting points and control mechanisms like start/stop buttons.
Hearing Protection and Roller Alerts
Highlights need for hearing protection and warns about feed roller danger zones.
OPERATING ENVIRONMENT
Objective of Design
Explains the chipper's purpose and ideal material inputs.
Usage Limitations and Prohibitions
Details operator restrictions and prohibited uses of the chipper.
TRANSPORTATION, HANDLING AND STORAGE
Transportation Procedures
Outlines delivery terms and responsibilities during transit.
Handling Guidelines
Advises on careful handling to prevent damage during movement.
Storage Recommendations
Provides best practices for storing the chipper to maintain condition.
Transportation Safety Notes
Specific safety procedures for lifting and securing the machine for transport.
TAKING A NEW MACHINE INTO USE
Preparations Prior to Operation
Steps for initial machine setup and checks before first use.
Packaging Disposal
Instructions for environmentally friendly disposal of packaging materials.
Attachment to Tractor
Guides for connecting the chipper's linkages to a tractor.
Tractor PTO and Hydraulic System
Information on PTO engagement and hydraulic system requirements.
PTO Shaft Length and Shortening
Details correct PTO shaft length and procedures for shortening it.
ADJUSTMENTS
Adjustment of Knife Settings
Step-by-step guide for setting knife-to-bed knife clearance.
Feeder Mechanism Speed Adjustment
How to synchronize feed roller speed with cutting knife speed.
USE
Handfeeding and Material Preparation
Guidance on manual feeding and preparing materials for chipping.
MAINTENANCE
Sharpening Cutting Knives
Proper technique for maintaining cutting knife sharpness.
Lubrication Schedule
Intervals and types of lubrication for machine components.
TROUBLESHOOTING CHART
Chipper Not Drawing Material or Uneven Chip Size
Common causes and remedies for feed or chip quality issues.
Blockages and Excessive Vibrations
Troubleshooting for discharge blockages and operational vibrations.
Feed Roller Issues
Diagnosing and fixing problems with feed roller operation.
WITHDRAWAL FROM ACTIVE USE
Disposal of Machine and Waste Materials
Procedures for environmentally compliant disposal of the machine and waste.
TERMS OF WARRANTY
Warranty Period and Coverage
Details on the duration and scope of the manufacturer's warranty.
Warranty Exclusions and Claims
Conditions voiding warranty and process for making claims.
Scope of Liability
Manufacturer's Liability Limitations
Statements limiting manufacturer's responsibility for misuse or third-party parts.
Operator Responsibility
Defines user duties for safe operation, maintenance, and manual understanding.
EC Declaration of Conformity
EC Declaration of Conformity (EN)
Official statement confirming machine compliance with EU directives in English.
Need help?
Do you have a question about the HJ-10GT and is the answer not in the manual?
Questions and answers