Download Print this page

Advertisement

Quick Links

www.rowenta.com
DW52XX
DW82XX
EN
FR
ES
DW53XX
DW83XX

Advertisement

loading
Need help?

Need help?

Do you have a question about the FOCUS EXCEL DW5351U1 and is the answer not in the manual?

Questions and answers

Summarization of Contents

Important Safety Instructions
Special Instructions
Additional safety guidelines for circuit overloads and extension cords.
Water Usage Guidelines
What Water to Use
Instructions on using untreated tap water and when to mix with demineralised water.
Water Types to Avoid
List of water types that can damage the iron and cause issues.
Setup and First Use
Initial Setup Steps
Removing soleplate cover, setting steam lever, opening, and filling the water tank.
Final Setup Steps
Closing the filling door, plugging in, and setting the thermostat.
Auto Off Function
Operation and Indicators
Pilot light status, iron readiness, and automatic switch-off times.
Reactivation and Cooling
How the auto-off light blinks and how to reactivate the iron.
Dry Ironing Operation
Set Steam Lever for Dry Ironing
Adjust the steam lever to the dry ironing position.
Spray Function
Press Spray Button
Activate the spray feature by pressing the designated button.
Shot of Steam
Steam Burst Procedure
Setting thermostat to MAX and pressing the steam button for 1 second.
Vertical Steam
Vertical Steam Procedure
Setting thermostat, holding iron vertically, and using steam.
Garment Distance for Vertical Steam
Maintain an 8-inch/20cm distance from the garment for vertical steaming.
Warnings and Attention
Specific Usage Warnings
Warnings about vertical steaming, iron placement, and leaving it unattended.
Soleplate Cleaning
Cleaning Procedure
Cooling, wiping with a damp cloth, and avoiding detergents or abrasives.
Iron Storage
Preparation for Storage
Unplugging, setting steam lever, cooling down, and emptying the water tank.
Storage Method
Wrapping the cord and storing the iron in a vertical position.
Cleaning the Anti Calc Valve
Cleaning Process Overview
Recommended frequency, unplugging, cooling, emptying, unlocking, and removing the valve.
Soaking and Rinsing Valve
Soaking the valve in solution and rinsing it under running water.
Replacing the Anti Calc Valve
Reinstalling the valve; the iron requires it to function.
Self Cleaning
Self Cleaning Preparation
Setting lever, filling tank, plugging in, and setting thermostat for self-cleaning.
Self Cleaning Procedure
Holding iron over sink, releasing valve pin, and shaking for one minute.
Post Self Cleaning Steps
Replacing valve, plugging in, and heating iron to dry the soleplate.