Advertisement
Type 45 Upright Fountain
Type 63 Bubbler
Installation and Maintenance Instructions
BUB206C
BUB206L
BUB224C
BUB224L
technical data
Inlet Connection
Recommended Working Pressure Range
Flow Rate
Recommended Temperature Range
Enware products are to be installed in accordance with the Plumbing Code of Australia (PCA) and AS/NZS3500.
Installations not complying with PCA and AS/NZS 3500 may void the product and performance warranty provisions.
Reference should also be made to the Australasian Health Facility Guidelines (AHFG), ABCB and Local Government
regulations when considering the choice of, and the installation of these products.
This product must be installed and commissioned by a qualified plumber.
For use with potable water only.
NOTE: Enware Australia advises:
1. Due to ongoing Research and Development, specifications may change without notice.
2. Component specifications may change on some export models.
I00522_18 Dec 2023
1300 369 273 | info@enware.com.au | enware.com.au
1/2" BSP (15mm)
100 - 500 kPa
2 L/min (Adjustable)
5 - 30 °C
Advertisement
Table of Contents
Related Manuals for Watts 63
Summarization of Contents
installation
INSTALLATION PROCEDURE
Step-by-step guide for installing the bubbler, covering thread preparation and connection checks.
FLOW ADJUSTMENT
Adjusting Water Stream Height
Instructions on how to adjust the water stream height using the flow adjustment screw and cover.
operation
CAM ACTION HANDLE OPERATION
Details on how to operate the bubbler using the cam action handle, including turning flow on and off.
LEVER ACTION HANDLE OPERATION
Details on how to operate the bubbler using the lever action handle, including turning flow on and off.
components & spare parts
Top Assemblies Overview
Visual identification and listing of cam, lever, and button action top assemblies and their parts.
Flow Adjustment Components
Identification of the flow adjustment screw and cap assembly used for regulating water flow.
service & maintenance
DOME ADJUSTMENT
Procedure to adjust the dome for proper handle feel, sealing, and water flow control.
SPRING ACTION SBA SERVICING
Guidelines for servicing the spring action SBA, including cleaning, lubrication, and component replacement.
troubleshooting
Common Problems and Solutions
Table of common issues like constant water flow, no flow, and loose handles with their causes and rectifications.
product warranty statement
Warranty Conditions and Claims
Details on warranty conditions, how to make a claim, and supplier responsibilities under the warranty.
Warranty Table
Summary of warranty periods for different product groups and series, including labour support.
Need help?
Do you have a question about the 63 and is the answer not in the manual?
Questions and answers