Related Manuals for Busch-Jaeger Busch-Watchdog 90 BT 6851/22 Series
Summarization of Contents
Safety
Information and Symbols Used
Explains the meaning of warning symbols and signal words used in the manual for hazard communication.
Intended Use
Details the specified applications and purpose of the motion detector, defining its operational scope.
Improper Use
Describes uses that are not permitted and the associated risks of personal injury or property damage.
Target Group / Qualifications of Personnel
Identifies the intended users and outlines the required qualifications for handling the device safely.
Operation
Specifies the qualifications required for operating the device by end-users.
Installation, Commissioning and Maintenance
Outlines required qualifications for professional installation, commissioning, and maintenance.
Safety Instructions
Provides crucial safety warnings and general precautions for using the device to prevent hazards.
Information on Protection of the Environment
Environment
Addresses the proper disposal of electrical devices and environmental compliance regulations.
Setup and Function
Features
Lists the key functionalities and capabilities of the Busch-Watchdog® motion detector.
Overview of Types
Presents a summary of different product models, their specifications, and areas of application.
Device Overview
Details the physical components, parts, and their identification labels on the device.
Technical Data
Dimensional Drawings
Illustrates the physical dimensions of the device through clear technical diagrams.
Detection Range
Specifies the coverage area, reach, and mounting height considerations for the sensor.
Connection, Installation / Mounting
Requirement for the Electrician
Outlines necessary qualifications and safety requirements for electrical installers performing setup.
Electrical Connection
Provides wiring diagrams and instructions for safely connecting the device to the power supply.
Mounting
Explains the step-by-step process for physically installing the device onto surfaces.
Mounting Situation
Illustrates different mounting scenarios and locations for optimal detection performance.
Changing the Range
Describes how to adjust the sensor's detection range by modifying the device head position.
Installation Site
Offers guidance on selecting the most suitable location for device installation based on environmental factors.
Commissioning
Reduction of the Detection Range
Details methods for limiting the sensor's detection area using film or via the application.
Changing the Lateral Detection Area
Explains how to adjust the side-to-side detection coverage by turning the device head.
Adaptation to Slopes
Provides instructions for adjusting detection to account for changes in elevation or sloped surfaces.
Commissioning the Device via the App
Guides through the initial setup and configuration process using the dedicated mobile application.
Walking Test
Describes how to perform a test to verify detection range and functionality after installation.
Operation
Operating Modes for On-site Operation
Explains the different operational modes for manual control and automatic lighting functions.
Operating Modes for Operation via the App
Details how to control and configure the device's features and settings using the mobile application.
LED Status Display
Interprets the meaning of various LED indicators on the device for status monitoring.
RESET (Resetting the Device)
Provides step-by-step instructions for restoring the device to its original factory default settings.
Maintain
Maintenance-free Device
Informs that the unit requires no regular maintenance and advises against performing unauthorized repairs.
Cleaning
Offers guidance on how to safely clean the device's exterior without causing damage or ingress.
Need help?
Do you have a question about the Busch-Watchdog 90 BT 6851/22 Series and is the answer not in the manual?
Questions and answers