TYAN TRINITY 100AT Manual page 61

Hide thumbs Also See for TRINITY 100AT:
Table of Contents

Advertisement

Copyright(C) 1993, AWARD SOFTWARE, INC.
For VX/HX-2A59CT51
File Name to Program:
Error Message:
Type in the whole file name, e.g. A61AW10.BIN, and confirm that you want to
program the BIOS. The utility will then "Blank," "Erase," and "Program" the
flash memory on the mainboard with the new BIOS file. You should choose
"Yes" to save the original system BIOS to a floppy diskette before you
program the new BIOS. This leaves you with a backup of your original BIOS in
case you need to re-install it. If you cannot successfully program the new
BIOS file for some reason, re-install your original BIOS from the backup file.
Remember, always reset the CMOS after flashing to a new BIOS (see page 33).
Warning: If you do not successfully install a complete BIOS file in the flash
memory on the mainboard, your system may not be able to boot. If this
happens, it will require service by your system vendor. Follow the instructions
in this section precisely to avoid such an inconvenience.
S1590 Trinity 100AT
FLASH MEMORY WRITER V3.0
61
Date:4/13/98

Advertisement

Table of Contents
loading

This manual is also suitable for:

S1590S1590-100Trinity 100at

Table of Contents