Chapters
Table of Contents
Troubleshooting
Related Manuals for Bad Boy 5055 CS
Summarization of Contents
Safety and Warnings
General Safety Precautions
Outlines crucial safety measures and warnings before and during operation.
Safe Operating Practices
Details safe practices for work areas, lighting, and emergency preparedness.
Operator and Equipment Safety
Covers operator fitness, attire, implement selection, and safe driving practices.
Operational Safety Rules
Advises on safe machine starting, road shoulder attention, and brake pedal interlinking.
Driving and Hazard Warnings
Warns against rapid movements, stresses traffic regulation observance, and safe road driving.
Operational Hazard Prevention
Covers safety for stopped machines, operator-only rule, and keeping bystanders clear.
Child Safety and Training
Emphasizes child safety around the tractor and proper operator training.
Disposal and Pesticide Safety
Advises on proper disposal regulations and safe handling of agricultural chemicals.
Fuel and Loading Safety
Warns about fuel leaks, loading ramp specifications, and tractor movement during loading.
Pre-Work Safety Checks
Details safety for fueling, battery handling, and engine cleaning before operation.
Component and Tool Safety
Stresses safety for electrical components, tire inflation, and correct tool usage.
Securement and Battery Safety
Covers securing hood/covers, battery procedures, and brake/steering inspection.
Steering and Battery Precautions
Advises on steering lock, battery solution contact, and pre/post-use checks.
While Working Safety
Provides safety guidelines to follow during tractor operation, including ramps and ventilation.
Post-Operation Safety
Outlines safety procedures for after using the machine, including hot parts and fueling.
Operational Safety Post-Use
Reiterates keeping bystanders clear, engine shutdown for maintenance, and safe work locations.
Hydraulic and Starting Safety
Warns about hydraulic pressure, seat belt use, and confirming implement position.
Storage and Implement Safety
Covers battery disconnection for storage and confirming implement position before starting.
Other Operational Safety Rules
Covers additional safety points on maintenance, repairs, and modifications.
Implement and Weight Safety
Stresses following implement manuals, balancing heavy loads, and front-rear balance.
Implement and Tiller Safety
Warns about getting under implements, using correct balance weights, and tiller operation.
Transport and Brake Safety
Covers securing tractor during transport, brake interlock, and differential lock use.
Towing and Hill Driving Safety
Advises on drawbar use for towing, road shoulder attention, and hill driving precautions.
Leaving Tractor and Fuel Safety
Instructs on safe procedures when leaving the tractor and handling fuel spills.
Implement Engagement and Loader
Covers safe implement engagement and basic loader maintenance.
Drive-line Safety and Lighting
Warns about drive-line entanglement and emphasizes visible lighting systems.
General Maintenance and Electrical Safety
Covers maintaining parts, battery disconnection, and implement position checks.
Component Adjustment and Modification Safety
Advises against unauthorized adjustments and modifications, and safe chemical use.
Decals on Cabin
Illustrates and lists safety decals found on the tractor cabin.
Decals on ROPS
Illustrates and lists safety decals related to the Roll-Over Protective Structure (ROPS).
Decal Maintenance
Provides instructions on how to clean and maintain safety decals properly.
Warranty Information
Warranty Certificate Details
Explains warranty coverage and conditions, warning against modifications.
After-Sales Service and VIN
Details how to find production and engine serial numbers for service.
Service Parts and Genuine Parts
Recommends using genuine parts and fluids for safety and performance.
Tractor Specifications
Major Specifications (Cabin - Synchro)
Lists detailed engine, drivetrain, and hydraulics specs for 5045CS/5055CS models.
Major Specifications (Cabin - HST)
Lists detailed engine, drivetrain, and hydraulics specs for 5045CH/5055CH models.
Major Specifications (ROPS - Synchro)
Lists engine, drivetrain, and hydraulics specs for 5045S/5055S models.
Major Specifications (ROPS - HST)
Lists engine, drivetrain, and hydraulics specs for 5045H/5055H models.
Driving Speed
Provides tractor speeds in km/h (mph) for different ranges and transmissions.
Operation Description
Exterior Views
Identifies and labels external parts of the tractor cabin and ROPS structure.
Switches and Levers Overview
Shows and describes switches and levers for MEC and HST transmissions.
Key Switch and Steering Adjustment
Explains ignition key switch function and steering column tilt lever operation.
Shuttle and Combination Switches
Details forward/reverse shuttle lever and combination switch for turn signals.
Lamp and Horn Controls
Explains the functions of the lamp and horn switches for visibility and signaling.
Accelerator Lever Operation
Describes how to use the accelerator lever for engine speed control.
Instrument Panel Indicators
Identifies and explains various indicators and gauges on the instrument panel.
Indicator Lamp Functions
Explains the function of turn signal, high beam, and PTO indicator lamps.
Warning and Pre-heat Lamps
Describes engine oil pressure, pre-heat, and coolant warning lamps.
Gauge and Warning Lamp Functions
Explains battery charge warning, RPM gauge, hour meter, and fuel gauge.
PTO and Coolant Gauges
Details PTO rotating positions and the coolant temperature gauge.
DPF Lamp and Sensor Errors
Explains the DPF lamp and provides a guide for sensor error indications.
Pedal Controls (MEC)
Explains the function and operation of the clutch, brake, and accelerator pedals.
Pedal Controls (HST)
Describes brake pedal operation and HST shuttle pedals for forward/reverse drive.
Lever Controls Overview
Identifies various levers for cabin, ROPS, and HST operations.
Joystick Lever Operation
Explains the function of the joystick lever for loader operation.
Main Shift Lever
Describes selecting speeds and shifting gears with the main shift lever.
Implement Control Levers
Explains position control, SCV, and range shift levers for implement operation.
Parking Brake and MFWD Lever
Covers parking brake operation and engaging/disengaging the MFWD system.
PTO Shift and Differential Lock
Details PTO shift lever operation and differential lock pedal functions.
PTO and Cruise Control Switches
Explains PTO operation modes and how to set cruise control speed.
DPF Regeneration and Hazard Switch
Covers DPF regeneration initiation and hazard switch operation.
Work Lamps and Wiper Controls
Explains work lamp switches and wiper switch operation.
Air Conditioner and Storage
Details air conditioner settings and storage compartment features.
Seat Belt and Adjustment
Provides instructions for wearing the seat belt and adjusting the seat position.
ROPS Safety Frame
Discusses the purpose of ROPS and safety precautions, warning against operating without it.
Brake and Work Lamps
Explains when the brake lamp turns on and the use of ROPS work lamps.
Operation Procedures
Daily and Pre-Operation Checks
Lists daily inspections and pre-operation checks, including fueling and component checks.
Routine Check-up Sequence
Details the sequence for routine check-ups before starting work.
Engine and Implement Checks
Covers checks for engine hood, air cleaner, fan belt, and radiator.
Cable, Implement, and Brake Checks
Details checks for cable coating, implement condition, and brake free play.
Steering and Clutch Checks
Covers checks for steering wheel free play and clutch pedal condition.
Exhaust Gas and Boarding Safety
Details checks for exhaust gas, lamps, gauges, and safe boarding/leaving.
Running-In Period Maintenance
Outlines important checks and maintenance during the initial operation period.
Engine Starting and Stopping
Provides safety precautions and procedures for starting and stopping the engine.
Starting Engine Procedures
Details the steps for starting the tractor engine, including lever and switch positions.
Cold Start and Engine Stopping
Provides procedures for cold starts and safely stopping the engine.
Weight and Towing Precautions
Advises on reducing speed when attaching weight or towing loads.
Driving Instructions
Gives instructions on seat adjustment, seat belt use, and pedal operation.
Driving with Pedals and Levers
Details checking brake interlock, using position control, and accelerator lever.
Driving with Parking Brake and Levers
Covers releasing parking brake and setting main/range shift levers.
Shift Lever and Shuttle Operation
Advises on proper use of shift levers and safe driving practices.
Road and Slope Driving
Provides safety guidelines for driving on roads and slopes.
Pavement Entry and Exit
Guides on entering/leaving pavement, especially on slopes or raised ground.
Turning and Stopping Procedures
Details safe turning on pavement and the procedure for stopping the tractor.
Parking the Tractor
Provides instructions and precautions for parking the tractor safely.
Differential Lock Operation
Explains differential lock engagement/disengagement and associated cautions.
Implement Lifting and Lowering
Describes using the position control lever and flow control valve for implements.
Tractor Loading and Unloading
Provides safety guidelines for loading and unloading the tractor.
DPF Regeneration Process
Explains how to perform DPF regeneration and the required conditions.
DPF Regeneration Indications
Details lamp indications and buzzer sounds during DPF regeneration.
DPF Regeneration Error Displays
Lists error displays during DPF regeneration and their meanings.
Implement Attachment Procedures
Shows attachment positions and power matching cautions for implements.
Top Link and Implement Attachment
Guides on top link adjustment and attaching implements to the 3-point hitch.
Check Link Adjustment
Details how to adjust check link length for different implements.
Vertical Height and Lift Link Adjustments
Explains adjustments for vertical height and lift links.
PTO Driven Implement Installation
Provides steps and safety precautions for installing PTO driven implements.
Hydraulic Coupler and Hose Connection
Explains SCV lever operation and hydraulic hose connection procedures.
Implement Connection Precautions
Lists safety precautions for connecting implements, including hydraulic pressure.
Implement Handling Precautions
Provides general safety tips for handling implements, including rotavator specifics.
Plowing and Leveling Patterns
Describes effective plowing and land leveling patterns.
Wheel Tread Adjustment
Explains how to adjust wheel tread and tighten wheel bolts.
Tire, Wheel, Axle, and Steering
Covers tire pressure, wheel/axle checks, and power steering operation.
Towing and PTO Precautions
Provides towing instructions and PTO specifications/precautions.
Loader Operation Safety
Explains safe operation of the front-end loader, including power line contact.
Carrying Loads Safely
Provides instructions for safely carrying loads with the loader, especially on slopes.
Handling Heavy Objects
Offers guidance on safely handling large, heavy objects using the loader.
ROPS Folding Method
Details the procedure for folding and unfolding the ROPS, with safety notes.
Maintenance Procedures
Maintenance Schedule Chart
Provides a schedule for regular maintenance tasks based on hours or years.
Oil, Grease, and Anti-Freeze Chart
Lists recommended oils, greases, and anti-freeze types and their uses.
Fuel, Oil, and Coolant Capacities
Specifies capacities for fuel, engine oil, coolant, and transmission oil.
Engine Oil Checks and Changes
Explains how to check and change the engine oil, including first service interval.
Transmission and Hydraulic Fluid
Guides on checking and changing transmission/hydraulic fluid, including first service interval.
Front Axle Fluid Maintenance
Explains how to check and change front axle fluid, including first service interval.
Filter Replacements
Details replacement procedures for engine and transmission oil filters.
Fuel Filter and Air Draining
Describes fuel filter replacement and draining air from the fuel system.
Fueling and Coolant Procedures
Guides on checking fuel level, refueling safely, and coolant maintenance.
Anti-Freeze Mixture Ratio
Provides guidance on handling anti-freeze and its mixture ratio for safety.
Radiator Screen and Air Cleaner
Details cleaning procedures for the radiator screen and air cleaner element.
Battery Replacement and Disposal
Provides instructions for battery replacement and proper disposal.
Parking Brake Adjustment
Explains how to adjust the parking brake cable and related safety warnings.
Pipes, Hoses, and Cables
Advises checking pipes, hoses, and cables for damage and proper maintenance.
Greasing and Clutch Adjustment
Details greasing points and how to check/adjust clutch pedal free play.
Shuttle Pedal and Steering Wheel
Provides adjustment procedures for shuttle pedal and checks for steering wheel free play.
Brake System Checks
Details checking brake pedals for proper free play and avoiding one-sided braking.
Fan Belt Adjustment
Explains how to check fan belt tension, sag, damage, and adjust it.
Compressor Belt and Toe-in
Details checking and adjusting compressor belt and toe-in alignment.
Fuse and Fusible Link Checks
Guides on checking fuses, replacing burnt-out ones, and identifying fusible links.
Exhaust Gas and Tire Pressure
Explains exhaust gas interpretation and tire pressure/wheel bolt torque.
Troubleshooting Guide
Engine Troubleshooting
Addresses starter motor, engine start, and revolution issues with symptoms and actions.
Engine Overheating and Power Issues
Covers engine overheating and low power symptoms with their causes and solutions.
Engine Warning Lamps
Troubleshoots coolant, oil pressure, and battery warning lamp indicators.
Clutch and Brake Troubleshooting
Addresses issues with clutch slipping, brake function, and pedal return.
Hydraulic System Troubleshooting
Troubleshoots implement lifting/lowering problems and hydraulic system faults.
Electric System Troubleshooting
Addresses problems with headlamps, turn signals, and other lamps not turning on.
Storage and Disposal
Daily Storage Procedures
Provides instructions for daily storage, including cleaning and securing the tractor.
Long-Term Storage Guidelines
Outlines procedures for storing the tractor for extended periods.
Long-Term Storage Steps
Lists specific steps for long-term storage like filling fuel and disconnecting battery.
Storage Maintenance Precautions
Covers maintenance, cleaning, and replacement precautions for storage.
Operating After Long-Term Storage
Details inspection procedures before operating the tractor after long-term storage.
Usage and Environmental Disposal
Recommends practices for environmental protection related to machine usage and fluid disposal.
Engine Emission Warranty
Warranty Rights, Obligations, and Coverage
Explains owner rights, obligations, and manufacturer warranty coverage for emission systems.
Warranty Responsibilities and Exclusions
Lists owner responsibilities and warranty exclusions for engine emission systems.
Emission Parts Covered and Assistance
Lists warranty-covered emission parts and provides customer assistance contact information.
Need help?
Do you have a question about the 5055 CS and is the answer not in the manual?
Questions and answers