TYAN TOMCAT I815T User Manual page 39

(GMCH configuration, continued)
Display VBIOS Message
Internal Graphics Scaling
Internal Graphics TV Format
Output Device Sync / Non-sync
Digital Device Priority
AGP Graphics Aperture Size
Init Display Cache Memory
Paging Mode Control
RAS-to-CAS Override
CAS Latency
RAS Timing
Tomcat i815T S2080
FORMAT: [option]
OPTIONS: Enabled
Disabled
FORMAT: [option]
OPTIONS: Auto
[other]
FORMAT: [option]
OPTIONS: NTSC
PAL
[other]
FORMAT: [option]
OPTIONS: Synchronous
Non-Synchronous
FORMAT: [option]
OPTIONS: [other, dependent] Sets order of priority for
FORMAT: [option]
OPTIONS: ##MB
[other]
FORMAT: [option]
OPTIONS: Enabled
Disabled
FORMAT: [option]
OPTIONS: Open
Close
FORMAT: [option]
OPTIONS: Enabled
Disabled
[other]
FORMAT: [option]
OPTIONS: Slow
[other]
FORMAT: [option]
OPTIONS: Slow
[other]
Enables or disables the
video BIOS message.
Sets the scaling process
for the internal video
device.
Sets the type of video
standard for your country.
Set this according to your
video monitor type.
video output devices.
Sets maximum memory
aperture size for onboard
AGP port.
If Enabled, display cache
will be initialized at time of
system boot.
Enable or Disable the
paging mode.
Enables or Disables the
delay override.
Sets number of SCLKs
between Read by DRAM
and Read by Whitney.
Sets clock frequency for
RAS and RC.
39