Advertisement
Site Preparation Document F1612
Instructions and Sign-off
The information contained in this document is confidential, and only for the information of the intended recipient and may not be published or redistributed without the prior written consent of Summa NV.
Summa nv
Tel +32 59 27 00 11
Fax +32 59 27 00 63
Email support@summa.com
Website www.summa.com
Page 1 of 15
Advertisement
Table of Contents
Related Manuals for Summa F1832
Summarization of Contents
Section 1: Site Preparation Document
Preparation Before Installing Machine
Prior to installation, prepare the machine and ensure the installation place meets requirements.
Shipping, Arrival, and Unpacking
Forklift Requirements
Details forklift requirements for lifting the machine, including fork length and lifting capacity.
Pallet Truck Requirements
Recommended configurations for pallet trucks, including minimum fork length.
Shipping Points of Attention
Key considerations for unpacking and installation route, including stairs and doorway widths.
Optional System Configurations
Minimum Ceiling Height for Router
Specifies the minimum ceiling height required when the machine is equipped with the gantry.
Floorplan for Conveyor Extension
Top view floorplan dimensions for the F1612 with an optional conveyor extension.
Connections
USB Connection Details
Information on the provided USB cables and restrictions on using longer cables or hubs.
Electrical Connection
Electrical Connection Standards
Requirements for the wall socket and cable plug, specifying IEC60309 standard compliance.
Power Requirements
Details the required power supply voltages and current ratings for the machine and vacuum set.
Power Cable Specifications
Guidelines for power cable length, core configuration, diameter, and cross-section for different regions.
Pneumatic Connection
Pneumatic Tube Specifications
Details the required diameter and length for the pneumatic tube connecting to the compressor.
Pneumatic Connector Specifications
Details the required connector type and thread for pneumatic tube and compressor connection.
Compressor Requirements
Specifies pressure, flow rate, and air quality requirements for the compressor, with and without router option.
Router Option and System Requirements
Vacuum Cleaner Requirements
Specifies compatible vacuum cleaner types (Metabo, Hercules, 3rd party) and their voltage/power requirements.
Installation Tools
Reference to the F1612-3X installation manual for a complete list of required tools.
System Requirements
Details the necessary PC/laptop specifications, including OS, screen resolution, and USB ports.
Section 2: Signature Pages
Installation Checklist
Checklist covering delivery, forklift, personnel, path, area, connections, power supply, and compressor.
Extra Info
Section to document software used, operating system, designing software, and RIP.
Safety Precautions
Electrical Shock Hazard
Warning about qualified personnel and hazardous voltage after power disconnection.
Laser Safety
Caution regarding Class II laser, not staring into the beam, and potential radiation exposure.
Sharp Edges and Moving Parts
Warning about sharp edges and moving parts, advising not to touch with bare hands.
Additional Safety and Usage Precautions
Equipment Suitability and Usage
Caution that equipment is not for locations with children and to unplug when not in use.
Hot Surface Warning
Caution regarding hot surfaces and not touching marked parts.
Noise and Tool Usage Precautions
Warning to wear hearing protection for vacuum pumps and eye/hearing protection for power tools.
Need help?
Do you have a question about the F1832 and is the answer not in the manual?
Questions and answers