ACIQ PLATINUM -12W-HH-MB Installation & Owner's Manual

Wall-mounted air handler

Advertisement

Quick Links

PLATINUM WALL-MOUNTED AIR HANDLER*
INSTALLATION &
OWNER'S MANUAL
Models Covered:
ACiQ-09W-HH-MB
ACiQ-12W-HH-MB
ACIQ-18W-HH-MB
ACIQ-24W-HH-MB
*This manual covers the installation of the platinum wall-mounted air handler, used in
both platinum single-zone systems & multi-zone systems. The outdoor unit installation
instructions contained within this manual mainly applies to platinum single-zone systems.
For further information regarding the installation of a multi-zone system/condenser
please refer to the outdoor unit installation manual provided with the condenser.
w
IMPORTANT NOTE:
Read this manual carefully before installing or operating
your new air conditioning system. Make sure to save this
manual for future reference.
VERSION DATE: 01-11-23

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the PLATINUM ACiQ-12W-HH-MB and is the answer not in the manual?

Questions and answers

Summarization of Contents

Safety Precautions
General Safety Warnings
Covers warnings for product use, cleaning procedures, and general cautions.
Electrical Safety and Warnings
Details electrical hazards, grounding, fuse specifications, and wiring regulations.
Installation Safety Guidelines
Outlines crucial safety rules for installing the unit correctly and preventing hazards.
Refrigerant Handling and Disposal
Addresses safe handling of refrigerants and proper environmental disposal practices.
Unit Specifications and Features
Indoor Unit Display and Indicator Meanings
Explains the various symbols, codes, and indicators on the indoor unit's display panel.
Operating Temperature and Mode Guidelines
Specifies recommended operating temperature ranges and conditions for different modes.
Advanced Unit Functions
Describes special features like Active Clean, Sleep Operation, and Intelligent Eye.
Airflow Control and Manual Operation
Details how to adjust airflow direction and operate the unit manually without the remote.
Care and Maintenance
Cleaning Indoor Unit and Air Filters
Steps for cleaning the indoor unit and its air filters.
Maintenance for Non-Use and Inspection
Guidance on unit maintenance during periods of non-use and before seasonal operation.
Troubleshooting Common Issues
Diagnosing Unit Operation Problems
Identifies common issues like unit not turning on or changing modes.
Addressing Noise and Mist Issues
Explains causes and solutions for noises and white mist.
Resolving Cooling and Performance Issues
Troubleshooting poor cooling performance and other operational problems.
Handling Unit Malfunctions and Errors
Guides on power failures, frequent starts/stops, and error code interpretation.
Installation Accessories
Mounting and Piping Components
Lists key accessories like mounting plates, pipes, and drain joints needed for installation.
Manuals and Remote Control
Includes the user manual, remote control, batteries, and holder.
Indoor Unit Installation Procedures
Selecting Installation Location
Criteria for choosing an appropriate location for the indoor unit.
Mounting Plate Installation
Steps for attaching the mounting plate to the wall.
Wall Hole Drilling and Piping Preparation
Instructions for drilling the wall hole and preparing refrigerant piping.
Connecting Drain Hose and Cables
Steps for connecting the drain hose and electrical/signal cables.
Mounting the Indoor Unit
Procedures for securely attaching the indoor unit to the wall.
Outdoor Unit Installation
Location Selection and Drain Joint
Criteria for outdoor unit placement and installing the drain joint.
Anchoring and Cable Connection
Steps for securing the unit and connecting power and signal cables.
Refrigerant Piping and Evacuation
Pipe Lengths and Connection
Specifications for pipe length and detailed steps for connecting refrigerant pipes.
Air Evacuation Process
Procedures for evacuating the refrigerant circuit to remove moisture and air.
Adding Refrigerant
Guidelines for calculating and adding refrigerant based on pipe length.
Electrical Checks and Test Run
Electrical Safety and Leak Checks
Verifying electrical safety and performing gas leak detection.
Performing the Test Run
Instructions for conducting a test run to confirm proper unit operation.
Packing and Unpacking the Unit
Unit Packing Procedures
Instructions for safely packing the air conditioner for storage or transport.
Unit Unpacking Procedures
Steps for safely unpacking the air conditioner after delivery.

Table of Contents