Kenwood DNX6180 Quick Start Manual page 7

DNX7180/DNX7480BT/DNX6980/DNX6180/DNX6040EX/DNX6480BT/DNX5180
1
Touch the corresponding
key and set the value.
Language
Select the language used for the control
screen and setting items. Default is "American
English (en)".
After setting, touch [Enter].
Angle
Adjust the position of the monitor. Default is
"0".
After setting, touch [
iPod AV Interface Use
Set the terminal which your iPod is connected
to. Default is "iPod".
Color
Set the screen and button illumination color.
You can select whether to perform color scan
and adjust scanning color.
After setting, touch [
EXT SW
Control the external devices.
After setting, touch [
Camera
Set the parameters for the camera.
After setting, touch [
]
]
]
]
7
2
Touch [Finish].
NOTE
• For details on operations of each setting,
refer to the Instruction Manual.
• You can adjust the front panel button (ATT
button, etc.) sensitivity of
For details, refer to Panel Switch
Sensitivity (P.71) in the Instruction
Manual.
.