Reliability Specifications; Error Rates; Environmental Interference - Seagate Savvio 10K Product Manual

5.0

Reliability specifications

The following reliability specifications assume correct host/drive operational interface, including all interface
timings, power supply voltages, environmental requirements and drive mounting constraints (see Section 8.3).
Seek Errors
Read Error Rates [1]
Recovered Data
Unrecovered Data
Miscorrected Data
MTBF
Service Life
Preventive Maintenance
Note.
[1] Error rate specified with automatic retries and data correction with ECC enabled and all flaws reallocated.
5.1

Error rates

The error rates stated in this specification assume the following:
• The drive is operated per this specification using DC power as defined in this manual (see Section 6.2).
• The drive has been formatted with the SCSI FORMAT command.
• Errors caused by media defects or host system failures are excluded from error rate computations. Refer to
Section 3.2, "Media Characteristics."
• Assume random data.
5.1.1

Environmental interference

When evaluating systems operation under conditions of Electromagnetic Interference (EMI), the performance
of the drive within the system shall be considered acceptable if the drive does not generate an unrecoverable
condition.
An unrecoverable error, or unrecoverable condition, is defined as one that:
• Is not detected and corrected by the drive itself;
• Is not capable of being detected from the error or fault status provided through the drive or SCSI interface; or
• Is not capable of being recovered by normal drive or system recovery procedures without operator interven-
tion.
Savvio SCSI Product Manual, Rev. D
8
Less than 10 in 10 seeks
Less than 10 errors in 10
Less than 1 sector in 10 15
Less than 1 sector in 10
21
1,400,000 hours
5 years
None required
bits transferred (OEM default settings)
12
bits transferred (OEM default settings)
bits transferred
17