Performance Characteristic; Internal Drive Characteristics (Transparent To User); Scsi Performance Characteristics (Visible To User); Access Time [5] - Seagate Savvio 10K Product Manual

4.0

Performance characteristic

4.1

Internal drive characteristics (transparent to user)

Drive capacity
Read/write heads
Bytes/track
Bytes/surface
Tracks/surface (total)
Tracks/inch
Peak bits/inch
Internal data rate
Disc rotational speed
Average rotational latency
4.2

SCSI performance characteristics (visible to user)

The values given in Section 4.2.1 apply to all models of the Savvio SCSI family unless otherwise specified.
Refer to Section 9.9 and to the SCSI Interface Product Manual for additional timing details.
4.2.1

Access time [5]

Average—Typical [2]
Single Track—Typical [2]
Full Stroke—Typical [2]
4.2.2 Format command execution time (minutes)
Maximum (with verify)
Maximum (no verify)
Savvio SCSI Product Manual, Rev. D
ST973401 ST936701
73.4 36.7
4 2
360,000 360,000
18,387 18,387
51,052 51,052
105 105
660 660
506-753 506-753
10,009 10,009
3.00 3.00
Including controller overhead
(without disconnect) [1] [3]
Drive level
Read Write
msec
4.70 5.10
0.65 0.95
8.70 9.10
ST973401 ST936701
52 26
26 13
GBytes (formatted, rounded off values)
Kbytes (average, rounded off values)
Mbytes (formatted, rounded off values)
Tracks (user accessible)
KTPI
KBPI
Mbits/sec (variable with zone)
revolutions/min (RPM)
msec
Not including controller overhead
(without disconnect) [1] [3]
Drive level
Read Write
msec
4.50 4.90
0.45 0.75
8.50 8.90
[1]
11