Table of Contents
Advertisement
Quick Links
Advertisement
Table of Contents
Related Manuals for NCR 1659
Summarization of Contents
Preface
Audience
This book is written for hardware installer/service personnel, system integrators, and field engineers.
Safety Requirements
The NCR N4000 Site Controller conforms to all applicable legal requirements. To view the compliance statements, see the NCR HSR Servers Safety and Regulatory Statements (BCC5-0000-5096).
Servicing Guidelines
Specifies that only qualified technicians should service the product, as it contains no user-serviceable parts.
Lithium Battery Warning
Warns about explosion risk if batteries are replaced incorrectly and advises on proper replacement and disposal.
Battery Disposal (Switzerland)
Refers to Annex 4.10 of SR814.013 for specific battery disposal instructions for Switzerland.
Moisture and Perchlorate Notification
Moisture Handling
The N4000 is not water-resistant and should not be exposed to direct water spray or installed outdoors.
Perchlorate Material Notification
Provides information on perchlorate material in coin cell batteries and links to related regulations.
Peripheral Usage and Safety Warnings
Peripheral Device Requirements
Ensures peripheral devices are certified and warns against connecting/disconnecting them while the terminal is powered.
System Mounting Considerations
Mounting Hazard Warnings
NCR N4000 terminals must be mounted securely to prevent hazards and withstand four times the unit's weight.
Power Supply Cord and Grounding Instructions
Power Supply Cord as Disconnect Means
The power supply cord is the main disconnect device and must be accessible for safe operation.
AC Power Cord and Source Connection
Details on using the attached power cord and connecting to an AC source, including regional adapter needs.
Grounding Instructions
Explains grounding's role in preventing electric shock and proper plug/outlet usage.
Grounding Circuit Continuity
Grounding Circuit Continuity Warning
Emphasizes vital importance of grounding continuity for safe operation, warning against disconnection.
Radio Frequency Interference Statements
FCC Compliance Information
Details FCC limits for Class A digital devices and user responsibilities for interference correction.
Canadian Compliance Statement
Canadian ICES-003 Compliance
States compliance with Canadian ICES-003 and related Interference Causing Equipment Regulations.
European Union Compliance Statement
EU EMC Directive Compliance
Confirms compliance with EMC Directive 2004/108/EC using EN55022 and EN55024.
Australia / New Zealand Compliance Statement
AUS/NZ AS/NZS 3548 Compliance
States compliance with Australian/New Zealand standard AS/NZS 3548:1995 for Class A digital devices.
International Radio Frequency Interference Statement
Class A Product Interference Warning
Warns that NCR N4000 terminals, as Class A products, may cause radio interference in domestic environments.
Out of Box Failure (OBF)
Reporting Out of Box Failures
Procedure for reporting OBF, including required details and contact information for replacement.
Warranty Information
Warranty Terms and Exclusions
Details warranty variations, exclusions like wear/tear, improper maintenance, and unauthorized modifications.
Returning Defective Hardware for Service
Procedure for Returning Defective Hardware
Steps to report/return defective hardware, including contacting NCR Customer Care and obtaining an RMA.
Chapter 1: Product Overview
Introduction to the N4000 Site Controller
The NCR N4000 Site Controller is a small form factor, solid-state, back of house site controller.
Features and Benefits
Details the key features and benefits of the NCR N4000 Site Controller, such as processor, displays, and connectivity.
Technical Specifications
Lists detailed technical specifications including CPU, memory, storage, connectivity, environmental, and certifications.
Hardware Design and External Connectors
Describes the physical design and illustrates the external ports and connectors of the NCR N4000.
Chapter 2: Installing the Site Controller
Safety Precautions for Installation
Lists essential safety precautions to ensure safe installation of the NCR N4000, focusing on electrical hazards.
Installation Procedures Overview
Outlines the steps for installing the NCR N4000 Site Controller on a counter top, referring to other sections.
Connecting Peripherals
Details on connecting common peripherals like keyboard, mouse, and monitor to the N4000.
Connecting Printer, Audio, and Network
Instructions for connecting printers, microphones, speakers, and network cables to the N4000.
Connecting to a Power Source
Details on connecting the N4000 to a power source, including voltage and connector information.
Chapter 3: Using the Site Controller
Starting Up and Shutting Down
Procedures for powering the NCR N4000 Site Controller on and off.
Activating/Deactivating the Second LAN
Steps to disable or enable integrated network adapters via Device Manager.
BIOS Update Procedures
Covers prerequisites, downloading, and methods (Windows package, USB key) for updating the BIOS.
Cleaning the Site Controller
Instructions for safely cleaning the NCR N4000 Site Controller.
Need help?
Do you have a question about the 1659 and is the answer not in the manual?
Questions and answers