NCR 1651 Quick Reference Manual

Panther Fuel Controller Quick Reference Guide - 1651
Product Highlights
Thank you for purchasing the NCR
Panther Fuel Controller.
The Panther Fuel Controller is designed to
offer direct connectivity to all major brands of
dispensers and outdoor payment terminals.
This high-performance solution replaces
multiple forecourt devices typically required by
most existing solutions and enables robust
marketing programs and credit card encryption
methods all while dramatically decreasing
transaction times.
Included Accessories
Qty 1 - 6ft (2m) left
angle power cable
(U.S. plug)
Qty 1 - 2ft (0.7m)
flexible conduit
Qty 2 – conduit fitting
Qty 1 – wall bracket
Qty 8 – black tie wraps
Qty varies – three
position connectors
Qty varies – two position
connectors
Qty 1 – cable label
sheet
1) Attach the bracket to the wall (refer to Mounting Bracket Installation section for additional info)
2) Slide Panther housing onto the wall bracket side tabs
3) Secure the two captive screws with a straight blade screwdriver
Open Door To Access Internal Boards/Connections
Page 1
Wall Mounting Instructions
Note: Case and Wall bracket colors are
changed in some graphics to aid in detail clarity.
Disconnect A/C power cord from the
unit before opening door.
To open door, turn the slotted latch
with a coin or screw driver ¼ turn.
Once unlatched the door can be
opened. Please note that lifting up
on the door while opening will result
in the door coming off the hinges by
design.
497-0503689 Rev C