Advertisement
Quick Links
Document number: 2201427
Last Modified: 2024-03-06
BATTERILADDARE
BATTERY CHARGER
BATTERIELADER
AKKULATURI
100 - 450W / 230VAC
BC 1207 / BC 1212 / BC 1217 / BC 1230 / BC 2405 / BC 2412 / BC 2420
BATTERY TYPE (LEAD - ACID): STD / GEL / AGM / EFB
SVENSKA
ENGLISH
DEUTSCH
SUOMI
Calix AB, PO-Box 5026, SE-630 05 Eskilstuna, Sweden Phone: +46 (0)16-10 80 00,
Fax: +46 (0)16 13 22 45
E-mail: info@calix.se, E-mail: teknik@calix.se, Internet: www.calix.se
Advertisement
Related Manuals for Calix BC 1217
Summarization of Contents
Safety Regulations
BEWARE
Always connect battery cables before power supply. Disconnect power before cables.
Intended Use
The battery charger is designed for charging lead accumulators.
Explosive Gases Warning
Lead-acid batteries generate explosive gases during charging. Avoid sparks and flames.
Risk of Explosion
Read and follow safety measures for explosive gases.
Charging Curves
Standard Batteries (STD)
Charging curves for standard lead-acid batteries.
Gel/AGM Batteries
Charging curves for Gel and AGM battery types.
LED Indicator - Models BC 1207, BC 1212, BC 2405
Yellow LED
High charge phase: Starts with maximum current, then drops as battery recharges.
Yellow-Green LED
Low charge phase: Begins when current drops to 1.0 A, maintains higher voltage for 5 hours.
Green LED
Maintenance charging: Voltage drops, current ~0.1 A, battery stays fully charged.
LED Indicator - Models BC 1217, BC 1230, BC 2412, BC 2420
Yellow LED
High charge phase: Starts with maximum current, then drops as battery recharges.
Yellow-Green LED
Low charge phase: Begins when current drops to 1.0 A, maintains higher voltage for 5 hours.
Green LED
Maintenance charging: Voltage drops, current ~0.1 A, battery stays fully charged.
Installation
Mechanical Installation
Intended for vehicles, suitable for indoor/outdoor, must be mounted vertically for cooling.
BEWARE
Avoid high temperatures, ensure ventilation, attach securely to withstand shocks/vibrations.
Electrical Installation
WARNING: High voltage! Connect RED to POSITIVE (+), follow manufacturer's recommendation for BLACK cable.
Need help?
Do you have a question about the BC 1217 and is the answer not in the manual?
Questions and answers