TYAN TIGER I7501R Manual page 38

3.4.2 – IDE Configuration Sub-Menu
You can use this screen to select options for the IDE Configuration Settings. Use the
up and down <Arrow> keys to select an item. Use the <Plus> and <Minus> keys to
change the value of the selected option.
Main Advanced
IDE Configuration
IDE Legacy Configuration
S-ATA Running Enhanced Mode
P-ATA Channel Selection
S-ATA Ports Definition
Configure S-ATA as RAID
IDE channel 0 Master
IDE channel 0 Slave
IDE channel 1 Master
IDE channel 1 Slave
IDE channel 2 Master
IDE channel 2 Slave
IDE channel 3 Master
IDE channel 3 Slave
Hard Disk Write Protect
IDE Detect Time Out (Sec)
ATA (PI) 80pin Cable Detection
Feature
IDE Configuration
IDE Legacy Configuration
S-ATA Running Enhanced
Mode
P-ATA Channel Selection
S-ATA Ports Definition
Configure S-ATA as RAID
BIOS Setup Utility
PCI/PnP Boot Security
[P-ATA Only]
[Yes]
[Both]
[P0-3rd./P1-4th]
[No]
: [xxxx]
: [xxxx]
: [xxxx]
: [xxxx]
: [xxxx]
: [xxxx]
: [xxxx]
: [xxxx]
[Disable]
[xx]
[Host & Device]
Option
Disabled
Select combination you wish to
P-ATA only
use. Note only 4 IDE drives can
S-ATA only
be used at one time no matter
P-ATA and S-
what the combination.
ATA
Yes
No
Primary
Secondary
Both
P0-3rd./P1-4th
P0-4th./P1-3rd.
No
Yes
38
http://www.TYAN.com
Chipset Exit
Use [ENTER], [TAB]
or [SHIFT_TAB] to
select a field
Use [+] or [-] to
configure system time.
← → Select Screen
↑↓ Select Item
+/- Change Option
F1 General Help
F10 Save and Exit
ESC Exit
Description