Related Manuals for Sigenergy SigenStor BAT Series
Summarization of Contents
Overview
Introduction
Introduces product, networking, operation, and maintenance of the system.
Readers
Identifies the intended audience for the manual, including users and professionals.
Sign Definition
Explains safety signs and their definitions used throughout the document.
Chapter 1 Safety Precautions
Basic Information
General safety information and company liability for equipment damage or loss.
Safety Requirements
Details critical safety requirements, including danger, warning, and caution scenarios.
Chapter 2 Introduction to energy storage system
Product Introduction
Details the various inverter and battery pack models and their specifications.
Appearance and Dimensions
Illustrates the physical appearance and dimensions of Inverters, Battery Packs, and CommMod.
Port Introduction
Details the various ports and their functions on the SigenStor EC/AC/Hybrid left view.
Label Description
Explains the meaning of various symbols and labels used on the equipment.
Introduction to Typical Networking
Describes the components and main function of a home energy storage system.
Networking Diagram (Whole Home Backup)
Visual representation of a whole home backup networking configuration.
Networking Diagram (Partial Home Backup)
Visual representation of a partial home backup networking configuration.
Networking Diagram (Non-backup Networking)
Visual representation of a non-backup networking configuration.
Chapter 3 Site Selection Requirements
Installation Environment Requirements
Specifies environmental conditions and location criteria for safe and effective equipment installation.
Installation Position Requirements
Outlines requirements for the physical placement and orientation of the equipment.
Mounting Surface Requirements
Details requirements for the installation base and surface, including load-bearing and smoothness.
Chapter 5 System Operation
Working Mode
Describes the four operating modes of the energy storage system: Sigen AI, Self-Consumption, Fully Fed to Grid, Time-based Control.
Sigen AI Mode
Details Sigen AI mode, which customizes electricity solutions based on consumption habits and prices.
Fully Fed to Grid Mode
Explains the mode where PV power is maximized for sale to the grid and excess stored in batteries.
Self-Consumption Mode
Explains powering loads with PV energy, storing excess, and selling surplus to the grid.
Time-based Control Mode
Describes manual setting of charging/discharging periods for cost savings.
Backup Reserve
Explains how to set 'Backup Reserve' in mySigen App for grid outages.
LED Indicator State
Details the meaning of LED indicator colors and states for SigenStor EC/AC/Hybrid units.
CommMod Indicator
Explains the indicators for the CommMod, including power and network state.
mySigen App Query
Provides instructions on how to download and access the mySigen App for system monitoring.
Chapter 6 System Maintenance
Routine Maintenance
Details the recommended routine maintenance procedures for ensuring long-term equipment operation.
Equipment Powering-on/Power-off
Explains how to power the device on and off using the mySigen app or manual operation.
Handling Prolonged Inactivity
Provides guidance on system behavior and resumption after prolonged inactivity or offline periods.
Low SOC
Explains the risks of low battery charge and the required charging intervals to prevent damage.
Emergency Treatment
Provides critical procedures for handling emergencies like fire, flood, and battery malfunctions.
Chapter 7 Appendix
Technical Parameter
Directs users to product data sheets for detailed equipment parameter information.
Need help?
Do you have a question about the SigenStor BAT Series and is the answer not in the manual?
Questions and answers