Installing The Power Supply - TYAN THUNDER K8SRE Manual

2.14 - Installing the Power Supply

There are two power connectors on your Thunder K8SRE.
The Thunder K8SRE requires an EPS12V (24 pin + 8 pin) power supply to boot.
Please be aware that ATX 2.x and ATXGES power supplies are not compatible
with the board and can damage the motherboard and/or CPU(s).
EPS12V Main Power 24-Pin
(Chipsets & Components)
12 12 12 12
1
Applying power to the board
1. Connect the EPS 12V 8-pin power connector.
2. Connect the EPS 12V 24-pin power connector.
3. Connect power cable to power supply and power outlet
YOU MUST unplug the power supply from the wall outlet before
NOTE
plugging the power cables to motherboard connectors.
24
12 +3.3V
11 +12V2
10 +12V2
9 +5VSB
8 PWR OK
7 GND
6 +5V
5 GND
4 +5V
3 GND
2 +3.3V
1 +3.3V
13
EPS 12V 8-pin (CPU Power)
4 GND
3 GND
2 GND
1 GND
32
http://www.tyan.com
24 GND
23 +5V
22 +5V
21 +5V
20 RESVD
19 GND
18 GND
17 GND
16 PSON#
15 GND
14 -12V
13 +3.3V
8 +12V3
7 +12V3
6 +12V3
5 +12V3