TYAN THUNDER K8SRE Manual page 40

Node Memory Interleave
Dram Block Interleave
Large Memory Simulation
MTRR Mapping
ACPI SRAT Table
3.6.2 - Integrated Devices Sub-Menu
You can use this screen to select options for the Integrated Devices
settings. Use the up and down <Arrow> keys to select an item. Use the <Plus>
and <Minus> keys to change the value of the selected option.
Advanced
USB Control
USB BIOS Legacy Support:
SATA0 Controller
SATA1 Controller
Interrupt Mode:
NV RAID Configuration
F1: Help : Select Item
Esc: Exit : Select Screen Enter: Select
F10: Previous Values
Disabled
Enabled
Disabled
Enabled
Disabled
Enabled
Discrete
Continuous
Disabled
Enabled
PhoenixBIOS Setup Utility
[Disabled]
[Disabled]
[Enabled]
[Enabled]
[PIC]
-/+: Change Values
Sub-Menu
40
http://www.tyan.com
Interleave memory blocks
across Processor Nodes.
BIOS will auto detect
capability of memory
system.
Interleave memory blocks
across dram chip selects.
BIOS will auto detect
capability on each node.
Enable LMS mode only
when one CPU is installed
with 64G or more memory.
Configure MTRR mode.
Enable ACPI2.0 static
resources affinity table for
ccNUMA systems.
Item Specific Help
F9: Setup Defaults