Bios Power Menu - TYAN THUNDER K8SD PRO Manual

3.09 – BIOS Power Menu
Use this screen to select options for power management. Use the up and down arrow
(á/â) keys to select an item. Use the Plus and Minus (+/-) keys to change the value of
the selected option. A description of the selected item appears on the right side of the
screen. The settings are described on this page. The screen is shown below.
Main Advanced
APM Configuration
Power Management/APM
Resume On Ring
Resume On PME#
Resume On RTC Alarm
Power Button Mode
Restore on AC / Power Loss
Feature
APM Configuration
Power Management/APM
Resume On Ring
Resume On PME#
Resume On RTC Alarm
Power Button Mode
BIOS Setup Utility
PCI/PnP Boot
Option
Disabled
Enabled
Disabled
Enabled
Disabled
Enabled
Disabled
Enabled
On / Off
Standby
Suspend
http://www.TYAN.com
Security Chipset
Use [ENTER], [TAB]
or [SHIFT_TAB] to
select a field
[Enabled]
Use [+] or [-] to
configure system time.
[Disabled]
[Disabled]
? ? Select Screen
[Disabled]
? ? Select Item
[On/Off]
+/-
[Power Off]
F1
F10 Save and Exit
ESC Exit
Description
Disabled prevents the chipset power
management and APM (Advanced
Power Management) features.
Enabled allows the chipset power
management and APM features
When set to Enabled, any event
occurring to the COM Ring will
awaken a system which has
powered down.
An input signal from PME on the PCI
card awakens the system from a soft
off state.
When set to Enabled RTC Alarm
resume, you could set the date (of
month) and timer (hh:mm:ss), any
event occurring at will awaken a
system which has been powered
down.
Specifies how the externally
mounted power button on the front of
the chassis is used.
70
Power Exit
Change Option
General Help