TYAN THUNDER K8S Manual page 52

3.07 – BIOS Security Menu
The system can be configured so that all users must enter a password every time the
system boots or when BIOS Setup is entered, using either the Supervisor password or
User password. The Supervisor and User passwords activate two different levels of
password security. If you select password support, you are prompted for a one to six
character password. Type the password on the keyboard. The password does not appear
on the screen when typed. Make sure you write it down. If you forget it, you must clear
CMOS and reconfigure.
Main Advanced
Security Setting
Supervisor Password:
User Password:
Change Supervisor Password
Change User Password
Clear User Password
Boot Sector Virus Protection
.
Feature
Supervisor Password:
User Password:
Change Supervisor
Password
Change User Password
Clear User Password
Boot Sector Virus Protection
BIOS Setup Utility
PCI/PnP Boot Security
[Disabled]
Option
If the password has been set,
Not Installed
Installed displays. If no password is
Installed set, Not Installed displays.
If the password has been set,
Not Installed
Installed displays. If no password is
Installed
set, Not Installed displays.
Select this option to change
Supervisor Password
Select this option to change User
Password
Select this option to clear User
Password
Protects the first sector of the Hard
Drive from being written
52
http://www.TYAN.com
Chipset Power Exit
Use [ENTER], [TAB] or
[SHIFT_TAB] to select
a field
Use [+] or [-] to
configure system time.
+/- Change Field
Tab Select Field
F1 Help
F10 Save and Exit
ESC Exit
Description