Table of Contents
Advertisement
2.29 – Connecting External Devices
Connecting external devices to the motherboard is an easy task. The standard
devices you should expect to plug into the motherboard are keyboards, mice, and
printer cables. The following diagram will detail the ATX port stack for the following
board:
2.30– Installing the Power Supply
There are three power connectors on your Thunder K8QS Pro. Tyan recommends
that you have an EPS12V power supply that has one 24-pin and two 8-pin power
connectors.
The Thunder K8QS Pro is standard EPS 12V compatible, please take following
combination for reference. Please be aware that ATX 2.x, ATX12V and ATXGES
power supplies are not compatible with the board and can damage the motherboard
and/or CPU(s).
J29: 24-pin EPS 12V power
J63: 8-pin EPS 12V power
J25: 8-pin EPS 12V power
34
http://www.TYAN.com
connector
connector
connector
Advertisement
Table of Contents
