TYAN THUNDER K8QS Manual page 44

3.4.14 – I/O Device Configuration Sub-Menu
Feature
PS/2 Mouse
Floppy disk controller
USB Host Controller
USB BIOS Legacy Support
Onboard PCI IDE
Serial Port A
Serial Port A Base I/O Address
Serial Port A Interrupt
Serial Port B
Serial Port B Base I/O Address
Serial Port B Interrupt
Parallel port
Parallel Port Mode
Parallel Port Base I/O Address
Parallel Port Interrupt
Option
Enable
Disable
Enable
Disable
Auto
Enable
Disable
Disable
Enable
Disable
Primary
Secondary
Both
Enable
disable
3F8/2F8/3E8/
2E8
IRQ4 / IRQ3
Enable
Disable
3F8/2F8/3E8/
2E8
IRQ4 / IRQ3
Disable
Enable
Auto
Output only
Bi-directional
EPP
ECP
378/278/3BC
IRQ5 / IRQ7
44
http://www.TYAN.com
Description
Disable – prevent any installed PS/2
mouse from functioning, but frees up
IRQ 12
Enable – force the PS/2 mouse port to
be enabled regardless if a mouse is
present
Configure the floppy disk controller
Enable or disable the USB hardware
Enable or Disable support for USB
Keyboards and Mice in with a non-
USB aware OS such as DOS or UNIX
Enable the integrated local bus IDE
adapter
Configure serial port
Configure serial port
Configure Parallel port