TYAN THUNDER I840 User Manual page 45

4 Connect a power cable from your computer's internal power supply to each internal SCSI
Step
device.
Connecting Wide SCSI Devices
You can connect Wide SCSI devices to the internal LVD/SE connectors. If you do this, we recommend
that you connect them to the SCSI Channel A LVD/SE connector and that you connect all Ultra160 and
Ultra2 devices to the SCSI Channel B connector. Follow these steps to connect Wide SCSI devices:
1
Step
Locate a 68-pin internal Wide SCSI cable.
2
Step Plug one end of the cable to one of the SCSI connectors.
3
Step
Plug the other end of the cable to a terminated Ultra/Fast Wide SCSI device.
If you have other Ultra/Fast Wide SCSI devices, attach them to the connectors between the
4
Step
two ends of the cable. Be sure these other devices are unterminated.
Connect a power cable from your computer's internal power supply to each internal device.
5
Step
Thunder i840 S2520
45