Boot Menu; Security Menu; Exit Menu - TYAN THUNDER I840 User Manual

3.6 Boot Menu

The Boot Setup lets you configure options set for each device during boot. The options available will
depend on what devices you have installed in your computer.
Boot Device Priority
Hard Disk Drives
Removeable Drives
ATAPI CDROM Drives

3.7 Security Menu

The Security Setup lets you configure security options such as passwords and boot sector virus protec-
tion. The status of the Supervisor and User Passwords are shown at the top, and options can be set
through the rest of the configuration sub-screen.
Change Supervisor Password
Change User Password
Clear User Password
Boot Sector Virus Protection
A password screen (such as the example screen below) will appear when you select one of the Change
Password functions. To set a password, enter a unique set of 6 letters and/or numbers.

3.8 Exit Menu

Before you exit the BIOS, a set of options will be presented to you.
Exit Saving Changes
Exit Discarding Changes
Load Optimal Defaults
Load Failsafe Defaults
Discard Changes
Thunder i840 S2520
Sets the order of devices that BIOS will attempt to boot from.
Shows the available HDDs and allows changes to the order in
which each in booted (e.g. which boot firsts, second, and so on).
Shows the available removable drives and allows changes to
the order in which each in booted (e.g. which boot firsts, second,
and so on).
Shows the available CD-ROM drives and allows changes to the
order in which each in booted (e.g. which boot firsts, second,
and so on).
Install or change the password.
Install or change the password.
Immediately clears the User password.
Protect against boot sector viruses. [Default is Disabled]
Enter New Password:
Save changes and exit setup.
Do not save changes and exit setup.
Load optimal settings. Note: May not work with all applica-
tions.
Load failsafe settings. Note: May not work with all applica-
tions.
Disregard all changes you made.
37