Silicon Image SATA RAID FOR Manual page 33

Selecting a specific RAID set, such as Set 0, and the type of RAID set, the number of members and capacity is reported (A).
The Members tab of this window (B) reports the device identification (corresponding with the information in the BIOS) and the
state of each device. The State of the "destination" drive that is being rebuilt may report as Rebuild for a long period of time
depending on the size of the disk.
SMART and Configuration information is displayed by selecting the Smart Configuration tab (C). Also in this section is a
selection for automatically adding a hot spare and initiating a rebuild in the event of a fault on a RAID 1 set. Note that the spare
drive must have previously been allocated in the RAID BIOS configuration screen.
SATARaid User's Manual Copyright © 2003 Silicon Image Inc.
33