Silicon Image SATA RAID FOR Manual page 30

Press Enter to select Create Primary DOS Partition. FDISK will scan the drive and the following window will appear. Press
Enter to confirm use of the entire drive capacity for the partition.
While the partition is being created, a progress indication appears at the bottom of the screen. Once the percentage counter
reaches 100%, the following window will appear:
Press the Esc key to return to the FDISK Options menu. Repeat the process for any remaining drives that need to be
partitioned. When all drives have been partitioned, return to the FDISK Options menu, then press Esc to exit FDISK. The
computer will need to be rebooted.
Copyright © 2003 Silicon Image Inc. SATARaid User's Manual
30