HighPoint ATA-133 RAID User Manual page 19

2.4 Add/Delete Spare Disk
Follow these steps to add or delete a spare disk from the mirror array:
1. Within the Menu
Create/Delete Spare
activated, see below:
Just use the arrow key to highlight the target disk and press ENTER to add it
into the array, or highlight a spare disk and press ENTER to delete it from the
array.
2. After a disk is added into the array, its status will be marked as Hidden,
see below:
Warning:
1. Adding a spare disk into the mirror array will destroy all the data on that disk.
2.5 Set Boot Device
Follow these steps to select a disk or disk array as boot device:
1. Within the Menu
Select Boot Disk
be activated, see below:
2-5
column of main interface, use the arrow key to highlight
item and press ENTER, then the
column of main interface, use the arrow key to highlight
item, and then press ENTER; then the
BIOS Configuration Utility
Status column will be
Status column will