Advertisement
Quick Links
Advertisement
Related Manuals for Asus CN67
Summarization of Contents
Introduction and Preparation
Introduction
Explains the purpose of the RMA shim flow after hardware replacement.
Preparation
Lists prerequisites like a computer with internet and a USB flash drive.
Create RMA Shim Bootable USB Drive
Download Recovery Utility
Guides on acquiring the necessary recovery tool extension.
Add Extension to Browser
Details steps for adding the utility extension to the browser.
Prepare USB Drive
Guides on using the utility to create bootable recovery media.
Finalize USB Media Creation
Completes the creation of the bootable USB media.
Disable Hardware Write Protection
Locate and Disable Write Protection Pin
Guides on finding and shorting the hardware write protection pin.
Enter Developer Mode (DEV Mode)
Initiate and Confirm Developer Mode
Steps to start and confirm the enabling of developer mode.
Access Developer Console
Instructions on how to access the developer console.
Enable USB Boot & Install RMA Shim
Configure USB Boot and Reboot
Sets the system to boot from USB and initiates a reboot.
Initiate RMA Shim Installation
Starts the RMA shim installation process via USB.
Complete Installation and Reboot
Finalizes the installation and reboots into test mode.
Finalize Device Information
Boot to Factory Test Mode
Starts the device in factory test mode for finalization.
Update Device Data and Region
Enters serial number and selects the device region.
System Checks and Updates
Performs firmware, HWID, and TPM checks.
Finalize System and Reboot
Completes finalization, wipes data, and reboots to OOBE.
Need help?
Do you have a question about the CN67 and is the answer not in the manual?
Questions and answers