Basic Service - PROEL PLLAS050 User Manual

DMX CONTROL CHANNELS
Channel
CH 1
CH 2
CH 3
CH 4
CH 5

BASIC SERVICE

Regular cleaning of the elements in the optical path, as well as the air vents, is vital to maintaining the
operational quality of the PLLAS050.
Important! Excessive dust, smoke fluid, and particulate build-up degrades performance and causes
overheating and damage to the fixture that is not covered by the warranty.
Cleaning the air vents:
To maintain adequate cooling, dust must be cleaned from the air vents periodically. Remove dust from
the air vents with a soft brush, cotton swab, vacuum, or compressed air.
Cleaning optical components:
Clean the optical components regularly. The presence of smudges or dust on optical surfaces can
reduce the strength of the light output and the quality of the effects.
Use care when cleaning optical components and work in a clean, well lit area. The coated surfaces are
fragile and easily scratched. Do not use solvents that can damage plastic or painted surfaces.
Function Value
000 – 127
Working mode
128 – 255
Patterns 000 – 255
000 – 063
064 – 127
Movements
128 – 191
192 – 255
000 – 127
Center rotation
128 – 255
Strobe 000 – 255
13
Specifications
OFF
ON
20 different patterns
No effects
Horizontal rotation
Vertical rotation
Horizontal and vertical
rotation
No rotation
From min to max
From min to max