Related Manuals for Sicma RC 165
Summarization of Contents
INTRODUCTION
SOME NOTES REGARDING THE USER MANUAL
Guidance on the proper use and importance of the user manual for safety and performance.
DECLARATION OF CONFORMITY
Official statement confirming the tiller meets EU safety and health requirements and applicable standards.
LIST OF RESIDUAL RISKS
Identification of potential hazards that remain even after safety measures are applied to the machine.
DELIVERY LETTER
Information regarding machine compliance, safety devices, and manual delivery confirmation.
TILLER IDENTIFICATION AND MANUAL CODE
Instructions on how to identify the tiller model and manual code for service requests.
GENERAL DELIVERY NOTES
Guidelines for checking the delivered tiller and its accessories for damage or missing parts.
DECLARED USE
Specifies the intended purpose of the RC Tiller and defines improper uses to avoid.
SAFETY
DEFINITIONS (UNI EN ISO 12100-1:2009)
Defines key safety terms like Danger, Dangerous Area, Critical Area, and Exposed Person.
CONVENTIONAL SYMBOLS
Explains the meaning of standard safety symbols used in the manual and on the machine.
SAFETY PRESCRIPTIONS
Outlines crucial safety rules and general precautions that operators must follow before using the tiller.
OPERATOR REQUISITES
Specifies the qualifications, training, and conduct required for the operator using the tiller.
CLOTHING AND PPE
Details the necessary personal protective equipment (PPE) and appropriate clothing for safe operation and maintenance.
MACHINE USE
Covers guidelines for the correct and safe operation of the tiller, including pre-start checks and usage conditions.
SAFETY DEVICES
Emphasizes the importance of safety devices, their maintenance, and the prohibition of tampering.
REASONABLY PREDICTABLE INCORRECT USE
Lists common misuse scenarios and prohibited actions to prevent accidents and damage.
ZERO ENERGY STATE
Describes the procedure to ensure the machine is de-energized before maintenance or cleaning.
POSITION OF PICTOGRAMS ON THE MACHINE
Illustrates the locations of safety pictograms on the tiller for easy identification.
UNLOADING AND UNPACKING THE TILLER
TILLER PROTECTED BY HEAT-SHRINKABLE FILM
Step-by-step instructions for safely unloading the tiller when it's protected by heat-shrinkable film.
TILLER IN WOODEN CRATE
Procedures for safely unloading the tiller when it is packed inside a wooden crate.
START-UP
3-POINT HITCH CONNECTION
Detailed instructions on how to correctly connect the tiller to the tractor's 3-point hitch system.
CARDAN SHAFT CONNECTION
Guidelines for properly connecting the Cardan shaft between the tractor PTO and the tiller.
CHECK THE STABILITY OF THE TRACTOR-TILLER COMPLEX.
Explains how to ensure tractor-tiller stability, including weight distribution and ballast calculations.
ROAD TRANSPORT
Information on legal requirements and precautions for transporting the tiller on public roads.
ADJUSTMENTS
ROTOR ROTATION SPEED GEAR
Instructions on how to adjust the gear settings to modify the rotor's rotation speed.
CLUTCH ADJUSTMENT
Guidance on adjusting the clutch calibration for optimal power transmission and overload protection.
WORKING HEIGHT ADJUSTMENT
Procedures for adjusting the tiller's working depth by modifying the height of the side skids.
MACHINING
Basic instructions for operating the tiller once connected to the tractor.
PREVENTIVE MAINTENANCE
Steps to perform before initial use or after periods of inactivity to ensure proper function.
ROUTINE MAINTENANCE
CONTROL AND REPLACEMENT OF THE OIL IN THE GEARBOX UNIT
Instructions for checking and changing the lubricating oil in the tiller's gearbox.
CONTROL AND REPLACEMENT OF THE OIL IN THE LATERAL DRIVE SUMP
Procedures for checking and replacing the lubricating oil in the tiller's lateral drive sump.
GREASING THE ROTOR SUPPORT
Guidance on the correct procedure and frequency for greasing the rotor support.
HOES REPLACEMENT
Instructions on how to visually check and replace worn tiller hoes.
CARDAN SHAFT
Refers to the manufacturer's manual for lubrication and maintenance of the Cardan shaft.
QUICK CONSULTATION TABLES
COUPLING TORQUE TABLE
A table specifying torque values for various bolt threadings and classes for assembly.
TROUBLESHOOTING TABLE
A guide to diagnose and resolve common operational issues and anomalies with the tiller.
MAINTENANCE TABLE
A schedule outlining the recommended maintenance interventions based on operating hours.
Need help?
Do you have a question about the RC 165 and is the answer not in the manual?
Questions and answers