Toro Power Clear 38589 Operator's Manual
Toro Power Clear 38589 Operator's Manual

Toro Power Clear 38589 Operator's Manual

Snowthrower

Advertisement

Quick Links

Power Clear™ Snowthrower
Model No. 38588—Serial No. 310000001 and Up
Model No. 38589—Serial No. 310000001 and Up
Introduction
This snowthrower is intended to be used by
residential homeowners or professional, hired
operators. It is designed primarily for removing
snow from paved surfaces, such as driveways
and sidewalks, and other surfaces for traffic on
residential or commercial properties. It is not
designed for removing materials other than snow,
nor is it designed for clearing off gravel surfaces.
Read this information carefully to learn how to operate
and maintain your product properly and to avoid injury
and product damage. You are responsible for operating
the product properly and safely.
You may contact Toro directly at www.Toro.com for
product and accessory information, help finding a
dealer, or to register your product.
Whenever you need service, genuine Toro parts, or
additional information, contact an Authorized Service
Dealer or Toro Customer Service and have the model
and serial numbers of your product ready. Figure 1
identifies the location of the model and serial numbers
on the product. Write the numbers in the space
provided.
Figure 1
1. Model and serial number location
© 2009—The Toro® Company
8111 Lyndale Avenue South
Bloomington, MN 55420
Model No.
Serial No.
This manual identifies potential hazards and has
safety messages identified by the safety alert symbol
(Figure 2), which signals a hazard that may cause serious
injury or death if you do not follow the recommended
precautions.
1. Safety alert symbol
This manual uses 2 words to highlight information.
Important calls attention to special mechanical
information and Note emphasizes general information
worthy of special attention.
Safety
This snowthrower meets or exceeds the B71.3
specifications of the American National Standards
Institute in effect at the time of production.
Read and understand the contents of this manual
before you start the engine.
This is the safety alert symbol. It is used to alert
you to potential personal injury hazards. Obey all
safety messages that follow this symbol to avoid
possible injury or death.
Improperly using or maintaining this snowthrower
could result in injury or death. To reduce this
potential, comply with the following safety
instructions.
This snowthrower is capable of amputating hands
and feet and of throwing objects. Failure to observe
the following safety instructions could result in
serious injury.
Register at www.Toro.com.
Form No. 3362-550 Rev A
Operator's Manual
Figure 2
Original Instructions (EN)
Printed in the USA
All Rights Reserved

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the Power Clear 38589 and is the answer not in the manual?

Questions and answers

Summarization of Contents

Introduction and Safety Alert Symbol
Understanding Snowthrower Purpose and Hazard Symbols
Introduces the snowthrower and explains the critical safety alert symbol.
Training and Preparation
Operator Training and Pre-Operation Checks
Covers reading instructions, familiarizing with controls, and preparing for operation.
Safe Snowthrower Operation
Operating Procedures and Precautions
Details safe practices for operating the snowthrower, including avoiding hazards and proper use.
Clearing Chutes, Maintenance, and Safety
Safe Chute Clearing, Routine Maintenance, and Specific Safety
Covers clearing clogs, maintenance tasks, and Toro-specific safety guidelines.
Safety and Instructional Decals
Understanding Decals and Control Panel Symbols
Explains the importance of decals and the meaning of symbols on the control panel.
Setup and Loose Parts
Verifying Shipped Components for Setup
Guides users on checking that all necessary loose parts have been shipped for setup.
Handle and Chute Assembly
Handle Adjustment and Discharge Chute Installation
Details procedures for unfolding the handle and installing the discharge chute.
Engine Oil and Control Cable
Filling Engine Oil and Adjusting Control Cable
Covers filling the engine with oil and adjusting the control cable for proper operation.
Product Overview and Fueling
Identifying Parts and Safe Fueling Procedures
Identifies snowthrower components and provides critical safety guidelines for fueling.
Engine Oil Check and Starting Procedure
Daily Oil Check and Engine Start Steps
Explains how to check engine oil and the step-by-step process for starting the engine.
Starting Engine and Engaging Blades
Using Starters and Engaging Rotor Blades
Details starting methods and how to engage the snowthrower's rotor blades for operation.
Rotor Blades, Engine Stop, and Chute Control
Managing Rotor Blades, Engine Shutdown, and Chute Adjustment
Covers controlling rotor blades, stopping the engine, and adjusting the discharge chute and deflector.
Clogged Chutes, Operation Tips, Freeze Prevention
Clearing Clogs, Operating Advice, and Post-Use Care
Addresses clearing clogged chutes, offers operating tips, and provides methods to prevent freeze-up.
Maintenance Schedule and Control Cable Adjustment
Recommended Maintenance Tasks and Cable Adjustment Steps
Outlines the maintenance schedule and provides detailed steps for adjusting the control cable.
Rotor Blade Inspection and Engine Oil Change
Inspecting Blades for Wear and Changing Engine Oil
Details how to inspect rotor blades for wear and the procedure for changing the engine oil.
Engine Oil Change and Spark Plug Service
Refilling Oil, Disposal, and Spark Plug Maintenance
Completes the engine oil change process and describes spark plug servicing.
Spark Plug Installation and Reassembly
Installing Spark Plug and Reassembling Shrouds/Chutes
Covers installing the spark plug, connecting wires, and reassembling shrouds and chutes.
Drive Belt Replacement and Quick Shoot Adjustment
Replacing Drive Belt and Adjusting Quick Shoot Control
Details how to replace the drive belt and adjust the Quick Shoot control cables.
Quick Shoot Control Cable Adjustment
Fine-Tuning Quick Shoot Cable Tension
Provides detailed steps for adjusting the Quick Shoot control cable tension for proper chute movement.
Snowthrower Storage Procedures
Preparing and Storing the Snowthrower Safely
Offers comprehensive guidance on safely preparing and storing the snowthrower for extended periods.
Toro Warranties and Owner Responsibilities
Warranty Coverage, Service, and Owner Obligations
Explains warranty coverage, how to obtain service, and the owner's responsibilities for maintenance.

Table of Contents