Sony LBT-SH2000 Operating Instructions Manual page 27

• Make sure the microphone is turned on.
There is severe hum or noise.
• A TV or VCR is placed too close to the
unit. Move the unit away from the
source of noise.
• Connect the unit to a different wall
outlet.
• Install a noise filter (commercially
available) to the power cord.
• Turn off surrounding electrical
equipment.
The timer does not function.
• Check the timer setting and set the
correct time (page 23).
• Cancel the Sleep Timer function
(page 23).
The remote control does not function.
• Remove the obstacles between the
remote control and the unit.
• Move the remote control closer to the
unit.
• Point the remote control at the unit's
sensor.
• Replace the batteries (R6/size AA).
• Move the unit away from the
fluorescent light.
There is acoustic feedback.
• Reduce the volume.
• Move the microphone away from the
speakers or change the direction of the
microphone.
"CHILD LOCK" appears when you
press any button on the unit.
• Set the Child Lock function to off
(page 25).
"CONNECT ALL SPEAKERS AND
CHANGE VOL" appears.
• Connect all speakers and adjust the
volume to the level that you want.
Speakers
Sound comes from one channel or
unbalanced left and right volume.
• Place the speakers as symmetrically as
possible.
• Check that the speakers are connected
securely and correctly.
• The source being played back is
monaural.
There is no sound from a specific
speaker.
• Check that the speaker is connected
securely and correctly.
Disc player
The system does not eject the disc
and "LOCKED" appears.
• Consult your nearest Sony dealer or
local authorized Sony service facility.
The disc cannot be inserted.
• Check that the system is turned on.
• You cannot insert the disc immediately
after turning on the system.
The disc does not eject.
• You cannot eject the disc during
CD-USB Synchronized Transfer or
REC1 Transferring. Press x to cancel
the transferring, then press Z EJECT to
eject the disc.
• Consult your nearest Sony dealer.
Playback does not start.
• Wipe the disc clean (page 31).
• Reload the disc.
• Load the disc that this system can play
back (page 25).
• Remove the disc and wipe away the
moisture on the disc, then leave the
system turned on for a few hours until
the moisture evaporates.
l
Continued
27
US