Troubleshooting - Sony LBT-SH2000 Operating Instructions Manual

Note on DualDiscs
A DualDisc is a two sided disc product
which mates DVD recorded material on
one side with digital audio material on the
other side. However, since the audio
material side does not conform to the
Compact Disc (CD) standard, playback
on this product is not guaranteed.
Music discs encoded with copyright
protection technologies
This product is designed to play back
discs that conform to the Compact Disc
(CD) standard. Recently, various music
discs encoded with copyright protection
technologies are marketed by some record
companies. Please be aware that among
those discs, there are some that do not
conform to the CD standard and may not
be playable by this product.
Notes on playing multisession discs
• This system can play back multisession
discs when an MP3 file is contained in
the first session. Any subsequent MP3
files recorded in later sessions can also
be played back.
• If the first session is recorded in AUDIO
CD format, only the first session will be
played back.
US
26

Troubleshooting

Should you encounter a problem with
your system, find your problem in the
troubleshooting checklist below and take
the corrective action.
If the problem persist, consult your
nearest Sony dealer.
Note that if service personnel changes
some parts during repair, these parts may
be retained.
If "PROTECT" appears in the
display panel
Immediately unplug the power cord,
and check the following items.
• Are you using only the supplied
speakers?
• Is anything blocking the ventilation
holes of the unit?
After checking the above items and
fixing any problems, plug in the power
cord again and turn on the system. If
the issue persists, consult your nearest
Sony dealer.
General
The clock or timer setting is canceled.
• The power cord is disconnected or a
power failure occurred. Set the clock
(page 12) and timer (page 23) again.
There is no sound.
• Adjust the volume.
• Check the speaker connections
(page 10).
• Check the connection of the optional
equipment, if any (page 10).
• Turn on the connected equipment.
• There is no audio output during
Recording Timer.
There is no microphone sound.
• Adjust the microphone volume.
• Make sure the microphone is connected
to the MIC jack correctly.