Tuner; Listening To The Radio - Sony LBT-SH2000 Operating Instructions Manual

To delete the last step from the
program list
Press CLEAR on the remote control when
playback is stopped.
Notes
• (CD function only) The program list remains
available until you eject the disc.
• (USB function only) The program list is
cleared when you:
– remove the USB device.
– switch the USB memory select.
Playing repeatedly (Repeat
Play)
Press REPEAT on the remote control
repeatedly.
• REP: repeat all tracks or files
• REP 1: repeat a track or file
US
14

Tuner

Listening to the radio

Use the buttons on the remote control to
perform this operation.
1
Press TUNER/BAND repeatedly
to select FM or AM band.
2
For automatic scanning:
Press TUNING MODE repeatedly
until "AUTO" lights up in the display
panel. Then, press +/–.
Scanning stops automatically when a
station is tuned in, and then "TUNED"
and "STEREO" (for FM stereo
programs only) light up in the display
panel.
If "TUNED" does not light up and
scanning does not stop, press x to stop
scanning. Then, perform manual
tuning (below).
For manual tuning:
Press TUNING MODE repeatedly
until "AUTO" and "PRESET"
disappear from the display panel.
Then, press +/– repeatedly to tune to
the station you want.
Tip
To reduce static noise on a weak FM stereo
station, press FM MODE repeatedly until
"MONO" lights up in the display panel.
To change the AM tuning interval
The default setting for AM tuning interval
is 9 kHz (or 10 kHz for some areas). You
cannot change the AM tuning interval in
Power Saving Mode.
Use the buttons on the unit to perform this
operation.