Related Manuals for Solar Fabrik Mono S5
Summarization of Contents
Safety Instructions
General Safety Guidelines
Essential expert knowledge for PV system repair and operation by qualified specialists.
Applicable Safety Regulations
Compliance with local building codes, standards, and accident prevention rules during mounting.
Module Usage Guidelines
Operating instructions for solar modules, including altitude and temperature limits.
Danger to Life: Electrical Hazards
Critical warnings regarding electric shock, high voltage, and electric arcs during installation.
Transport, Storage, and Unpacking
Guidelines for careful transport, intermediate storage, and unpacking of solar modules.
Electrical Installation Requirements
Information on electrical installation for PV systems using Solar Factory GmbH modules.
Module Installation
Ensuring Safe Installation Practices
Safety measures for installation, including fall protection, load compliance, and preventing falling objects.
Module Earthing Procedures
Procedures for proper earthing of modules and racks for safety and lightning protection.
Handling AR Glass Modules
Guidelines for handling modules with anti-reflective coated glass to maintain performance.
Cell Production Technicals
Explanation of cell production processes and their impact on module color and efficiency.
Fire Protection During Installation
Measures to ensure fire protection during installation, avoiding flammable materials and hazards.
Suitable Installation Environment
Guidelines for selecting a suitable environment, avoiding corrosion risks and ensuring proper water runoff.
Installation Situation Requirements
Ensuring the module meets technical requirements and compatibility within the PV system.
Correct Mounting Location Selection
Guidance on selecting the correct mounting location for modules, considering load and facade mounting.
Optimizing Yield: Alignment and Inclination
Recommendations for module orientation and tilt angle to achieve optimal energy yield.
Shade-Free Module Installation
Importance of installing modules to avoid shading for maximum system yield.
Ensuring Sufficient Rear Ventilation
Ensuring adequate rear ventilation to prevent performance-reducing heat accumulation.
Secure Module Mounting
Guidelines for securely fastening modules, considering mechanical load capacity and wind/snow loads.
Installation Methods and Torque
Details on module connection methods (clamping/screwing) and required torque specifications.
Module Load Considerations
Considerations for module load capacity depending on mounting type and potential stresses.
Mounting Variants Standard Modules
Load Capacity 2400 N/m²
Details on mounting variants for standard modules with a load capacity of 2400 N/m².
Load Capacity 5400 N/m²
Details on mounting variants for standard modules with a load capacity of 5400 N/m².
Mounting Variants Non-Standard Modules
Load Capacity 2400 N/m²
Mounting variants for non-standard modules with a load capacity of 2400 N/m².
Load Capacity 5400 N/m²
Mounting variants for non-standard modules with a load capacity of 5400 N/m².
Cabling and Wiring
Proper Cabling
Instructions for proper cabling, emphasizing not opening the junction box and using existing cables.
Ensuring Correct Wiring
Guidelines for correct wiring, including checking connections, polarity, and using appropriate fuses.
Using Suitable Materials
Requirement to use only special solar cables and appropriate conductor cross-sections for wiring.
Cable Protection and Maintenance
Protecting Cables from Environmental Influences
Methods to protect cables from environmental damage, using UV-resistant ties and avoiding direct sunlight.
Ensuring Correct Plug Connector Installation
Procedures for correctly installing plug connectors, including alternative connectors and ground-level assembly.
Maintenance and Cleaning
Recommendations for module maintenance and cleaning, emphasizing gentle methods to protect coatings.
Disassembly and Liability
Instructions for Disassembly
Step-by-step instructions for safe disassembly of the photovoltaic system, including shutdown procedures.
Disposal of Modules
Information on the proper disposal and recycling of solar modules according to regulations.
Liability and Instructions Status
Disclaimer regarding deviations from instructions, improper use, and changes to technical status.
Need help?
Do you have a question about the Mono S5 and is the answer not in the manual?
Questions and answers