Table of Contents
Advertisement
Quick Links
Advertisement
Table of Contents
Related Manuals for Solar Fabrik Professional 54
Summary of Contents for Solar Fabrik Professional 54
- Page 1 Play it safe Installation guide solar modules Professional Vision...
- Page 2 DIN EN ISO 9001 Quality management system DIN EN ISO 14001 Environmental management system BS OHSAS 18001 Occupational health and safety management system Technical modifications and modifications of the product design are reserved. The technical information at the time of production of the product are valid. ©...
- Page 3 Installation guide Professional 54 Professional 60 Vision 54 | frameless Vision 60 Professional, Vision 1408TU0710...
-
Page 4: General Safety Information
Safety information General safety information Warning: Extreme Danger due to electrical shock! The operation and maintenance of a PV system require a substantial level of technical knowledge. Solar modules generate electricity. When exposed Therefore, any work on the system may only be to light, a voltage occurs, which can be dangerous carried out by qualified and authorized personnel. -
Page 5: Electrical Installation
Safety information Warning: Transport, temporary storage Danger due to high voltage! and safe unpacking Even in disconnected condition the inverter can The modules are sensitive technical components, retain high voltages, which is a major shock which must be handled with utmost care. hazard. -
Page 6: Installing The Module
Installing the module Make sure that the installation is carried out safely: Grounding symbol: Protect yourself and other persons from falling, do not carry out the installation in heavy winds and eliminate the risk of falling objects as much as possible. Secure the work area in order to avoid the endangerment or injury of persons. - Page 7 Mounting of grounding terminal on frame The grounding terminal must be placed on the frame in such a way that the screw touches the grounding hole. Using a screwdriver, install the screw into the grounding hole until its head is flush with the base and the base is flush with the frame.
-
Page 8: Ensure Comprehensive Fire Protection
Installing the module Ensure comprehensive fire The correct installation situation protection: It is very important that the module fulfills the technical requirements of the overall system. The installation of on-roof systems may influence Therefore, care must also be taken that the the fire safety of a building. - Page 9 Install the module in an area Secure attachment free of shade: To ensure that modules are installed correctly, make sure to securely attach the modules at least Even a low degree of shading will have a negative four points. Framed PV modules can be clamped effect on the system yield.
- Page 10 Installing the module Clamping areas Professional 54 Professional 60 1000 1000 1503 1660 Professional 54 Professional 60 Vision 54 | frameless Vision 60 1000 1000 1677 1496 Vision 60 Clamping areas: Approved up to 2,400 Pa Approved up to 5,400 Pa...
-
Page 11: Installation Data
Note: Example A: Clamping wing Pay attention to the maximum load-bearing capacity of the modules, with consideration of wind and snow load zones, the terrain category and the height of the building. Installation data: There are several methods to connect the modules to substructure: by clamping the modules from the front (example A) or by bolting the modules from the back (example B) using the provided... -
Page 12: Ensure Correct Wiring
Installing the module Proper wiring Protect the wires from adverse environmental effects: Never open the connection box! The modules are already fitted with all necessary wires and Only use UV-resistant cable ties for the connectors. attachment of the wires to the mounting system. Protect the exposed wire from possible damage, Ensure correct wiring: e.g. -
Page 13: Maintenance And Cleaning
Maintenance and cleaning Use of automatic cleaning machines for solar energy systems is at your own risk, and is not Usually, the modules are automatically cleaned authorised by Solar-Fabrik AG in any way. by rain. With an inclination of more than 15° the modules generally need no additional cleaning. - Page 14 Notes 1408TU0710 Professional, Vision...
- Page 15 Professional, Vision 1408TU0710...
- Page 16 Play it safe Solar-Fabrik AG Munzinger Str. 10 79111 Freiburg Deutschland Telefon +49 (0)761 4000-0 Telefax +49 (0)761 4000-199 www.solarfabrik.de...
Need help?
Do you have a question about the Professional 54 and is the answer not in the manual?
Questions and answers